Dell 6300 User Manual

Download Operation & user’s manual of Dell PowerEdge systems 6300 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.

Dell PowerEdge systems 6300 Operation & user’s manual - Page 1
1
Dell PowerEdge systems 6300 Operation & user’s manual - Page 2
2
Dell PowerEdge systems 6300 Operation & user’s manual - Page 3
3
Dell PowerEdge systems 6300 Operation & user’s manual - Page 4
4
Dell PowerEdge systems 6300 Operation & user’s manual - Page 5
5
Dell PowerEdge systems 6300 Operation & user’s manual - Page 6
6
Dell PowerEdge systems 6300 Operation & user’s manual - Page 7
7
Dell PowerEdge systems 6300 Operation & user’s manual - Page 8
8
Dell PowerEdge systems 6300 Operation & user’s manual - Page 9
9
Dell PowerEdge systems 6300 Operation & user’s manual - Page 10
10
Dell PowerEdge systems 6300 Operation & user’s manual - Page 11
11
Dell PowerEdge systems 6300 Operation & user’s manual - Page 12
12
Dell PowerEdge systems 6300 Operation & user’s manual - Page 13
13
Dell PowerEdge systems 6300 Operation & user’s manual - Page 14
14
Dell PowerEdge systems 6300 Operation & user’s manual - Page 15
15
Dell PowerEdge systems 6300 Operation & user’s manual - Page 16
16
Dell PowerEdge systems 6300 Operation & user’s manual - Page 17
17
Dell PowerEdge systems 6300 Operation & user’s manual - Page 18
18
Dell PowerEdge systems 6300 Operation & user’s manual - Page 19
19
Dell PowerEdge systems 6300 Operation & user’s manual - Page 20
20
Dell PowerEdge systems 6300 Operation & user’s manual - Page 21
21
Dell PowerEdge systems 6300 Operation & user’s manual - Page 22
22
Dell PowerEdge systems 6300 Operation & user’s manual - Page 23
23
Dell PowerEdge systems 6300 Operation & user’s manual - Page 24
24
Dell PowerEdge systems 6300 Operation & user’s manual - Page 25
25
Dell PowerEdge systems 6300 Operation & user’s manual - Page 26
26
Dell PowerEdge systems 6300 Operation & user’s manual - Page 27
27
Dell PowerEdge systems 6300 Operation & user’s manual - Page 28
28
Dell PowerEdge systems 6300 Operation & user’s manual - Page 29
29
Dell PowerEdge systems 6300 Operation & user’s manual - Page 30
30
Dell PowerEdge systems 6300 Operation & user’s manual - Page 31
31
Dell PowerEdge systems 6300 Operation & user’s manual - Page 32
32
Dell PowerEdge systems 6300 Operation & user’s manual - Page 33
33
Dell PowerEdge systems 6300 Operation & user’s manual - Page 34
34
Dell PowerEdge systems 6300 Operation & user’s manual - Page 35
35
Dell PowerEdge systems 6300 Operation & user’s manual - Page 36
36
Dell PowerEdge systems 6300 Operation & user’s manual - Page 37
37
Dell PowerEdge systems 6300 Operation & user’s manual - Page 38
38
Dell PowerEdge systems 6300 Operation & user’s manual - Page 39
39
Dell PowerEdge systems 6300 Operation & user’s manual - Page 40
40
Dell PowerEdge systems 6300 Operation & user’s manual - Page 41
41
Dell PowerEdge systems 6300 Operation & user’s manual - Page 42
42
1-2 Dell PowerEdge
6300 and 4x00
Systems SCSI Backplane Option
NOTICE: See "Protecting Against Electrostatic Discharge" in the Installation
and Troubleshooting Guide.
1. Unpack the SCSI backplane board.
Refer to the documentation accompanying the host adapter card.
WARNING: Before you continue with this procedure, you must turn off the
computer and disconnect it from its AC power source. For more information,
see "Safety First—For You and Your Computer" in the Installation and
Troubleshooting Guide.
2. Turn off the system, including any attached peripherals, and disconnect the sys-
tem AC power cable from its power source.
3. Remove the computer cover.
NOTICE: You must remove all hard-disk drives to avoid damaging the SCSI
backplane board when you remove it later in this procedure.
4. Remove the hard-disk drives from the system.
5. Slide the system board tray to its service position (see Figure 1-1).
6. Disconnect the Ultra160/m SCSI cable from the SCSI backplane board.
To avoid damage to the cable, use the strain-relief loop to disconnect the cable.
7. Disconnect the flat data cable from the locking connector on the backplane
board.
8. Disconnect the power cable labeled "HD-B/P" from the power connector on the
backplane board.
To release the connector, press the latch on the side of the connector.
9. Disconnect the fan power cable from the power connector labeled "FAN" on the
backplane board.
To release the connector, press the latch on the side of the connector.
10. Loosen the captive thumbscrew on the backplane board.
11. Slide the SCSI backplane board away from the chassis inner wall approximately
1 cm (1/4 inch), and then lift the board off of the L-shaped mounting tabs and
away from the chassis (see Figure 1-1).