Dell PowerEdge M420 User Manual

Download Operation & user’s manual of Dell PowerEdge M420 Computer Hardware, Desktop for Free or View it Online on All-Guides.com.

Dell PowerEdge M420 Operation & user’s manual - Page 1
1
Dell PowerEdge M420 Operation & user’s manual - Page 2
2
Dell PowerEdge M420 Operation & user’s manual - Page 3
3
Dell PowerEdge M420 Operation & user’s manual - Page 4
4
Dell PowerEdge M420 Operation & user’s manual - Page 5
5
Dell PowerEdge M420 Operation & user’s manual - Page 6
6
Dell PowerEdge M420 Operation & user’s manual - Page 7
7
Dell PowerEdge M420 Operation & user’s manual - Page 8
8
Dell PowerEdge M420 Operation & user’s manual - Page 9
9
Dell PowerEdge M420 Operation & user’s manual - Page 10
10
Dell PowerEdge M420 Operation & user’s manual - Page 11
11
Dell PowerEdge M420 Operation & user’s manual - Page 12
12
Dell PowerEdge M420 Operation & user’s manual - Page 13
13
Dell PowerEdge M420 Operation & user’s manual - Page 14
14
Dell PowerEdge M420 Operation & user’s manual - Page 15
15
Dell PowerEdge M420 Operation & user’s manual - Page 16
16
Dell PowerEdge M420 Operation & user’s manual - Page 17
17
Dell PowerEdge M420 Operation & user’s manual - Page 18
18
Dell PowerEdge M420 Operation & user’s manual - Page 19
19
Dell PowerEdge M420 Operation & user’s manual - Page 20
20
Dell PowerEdge M420 Operation & user’s manual - Page 21
21
Dell PowerEdge M420 Operation & user’s manual - Page 22
22
Dell PowerEdge M420 Operation & user’s manual - Page 23
23
Dell PowerEdge M420 Operation & user’s manual - Page 24
24
Dell PowerEdge M420 Operation & user’s manual - Page 25
25
Dell PowerEdge M420 Operation & user’s manual - Page 26
26
Rev 1.1 Mellanox Technologies
17
4 Troubleshooting
As soon as a switch is plugged in make sure that the power LED comes on.
The power LED for the switch does not come on:
1. Check that the chassis has power.
2. Remove and reinstall the switch.
The status LED for the switch is blinking amber:
1. remove the switch from the chassis and re-insert it (verify that the switch is all the way in the
chassis and the lever is firmly closed).
2. If the amber LED continues to blink, replace the switch.
The link LED for the InfiniBand connector does not come on:
1. Check that both ends of the cable are connected.
2. Check that the locks on the ends are secured.
3. Make sure that the latest FW version is installed on both the Mezzanine I/O card and the switch.
4. Make sure that at least one blade has a matching Mezzanine I/O card installed to support data
flow.
5. If media adapters are used check that the all connections are good, tight, and secure.
The activity LED does not come on:
Check that the Subnet Manager has been started.
The power LED for the switch shuts off:
1. Check that the there is adequate ventilation.
2. Make sure that there is nothing blocking the front or rear ventilation openings of the chassis.