Dell 4200 Installation Manual
Download Installation manual of Dell 4300 Computer Hardware, Desktop for Free or View it Online on All-Guides.com. This version of Dell 4300 Manual compatible with such list of devices, as: 4300, 4200, 4400, 5160, 4200W
Brand: Dell
Category: Computer Hardware , Desktop , Gateway , Laptop , Power Supply , Server , Storage , UPS
Type: Installation manual
Model: Dell 4300 , Dell PowerEdge systems 6300 , Dell 4200 , Dell 4400 , Dell 5160 , Dell 4200W
Pages: 28 (1.11 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
support.dell.com Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide 1-13
To replace the 24-U rack’s front and back doors, perform the following steps:
1. Lift the front door into position, and align the hinges with the hinge insert in the
rack as shown in Figure 1-4.
2. Slide the hinge pins into the hinge insert in the rack until the hinges lock into
position.
3. Repeat steps 1 and 2 to install the back door.
Installing the Rubber Feet
To install the rubber feet on the system base, perform these steps:
1. Lay the system on its left side (see Figure 1-11) on a piece of foam or cardboard
(to prevent damage to the system).
2. Attach a rubber foot in each of the four corners on the cabinet base (the cabinet’s
right side in the former rack configuration) using an 8-32 x 0.5-inch hex-head,
thread-forming screw (screws and rubber feet at provided with the kit), as shown
in Figure 1-11.
Figure 1-11. Installing the Rubber Feet
rubber feet (4)
8-32 x 0.5-inch screw