Craftsman PRO Series Operator's Manual
Download Operator's manual of Craftsman PRO series Lawn Mower, LCD Drawer for Free or View it Online on All-Guides.com.
Brand: Craftsman
Category: Lawn Mower , LCD Drawer , Saw , Snow Blower
Type: Operator's manual for Craftsman PRO series
Pages: 8
1
2
3
4
5
6
7
8
Ball bearing slides
OPERATOR’S MANUAL
• The maximum weight for each drawer should be no more than
200 lbs., 300 lbs. for double slides.
• The maximum product weight for each model combination,
including contents, should be no more than 2,500 lbs. static
load.
F2082
DANGER is used to indicate a hazardous situation which,
if not avoided, will result in serious injury or death.
WARNING indicates a hazardous situation which,
if not avoided, could result in serious injury or death.
CAUTION is used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION: Read and follow all Safety Rules and Operating
Instructions before assembly and rst use of this product.
LOCATING MODEL # INFORMATION
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice yearly.)
• Lubricate lock with graphite, (yearly).
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit’s luster nish. Apply the wax
as to a car. The wax will also help protect the unit against
scratches.
• Grease and oil can be removed with most standard
cleaning uids. For safety, use a nonammable cleaning uid.
• It is recommended that drawer liners are used to protect the
nish inside the drawers and to make the drawers easier to
clean. The drawer liners may be cleaned with soap and water.
CHESTS & CABINETS: CALL 1-800-366-7278 FOR SERVICE
PARTS. Refer to Service Parts Drawing for full listing of Service
Parts.
SMART LOCK: FOR MORE INFORMATION, QUESTIONS OR
SUPPORT: Search ‘Smart Lock’ on Craftsman.com or call 1-888-
331-4569
* Product you purchased may vary from picture shown
Distributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179
DANGER
• DO NOT stand on this product. You may fall or cause product
to tip.
• DO NOT open more than one drawer. The product may be-
come unstable and tip.
• DO NOT step in the drawers. You may fall or cause product to
tip.
• DO NOT mount this product on a truck bed or any other mov-
ing object.
• DO NOT move the product prior to closing and locking all the
drawers and chest lid. The drawers could come open and
make the product unstable and tip.
• DO NOT place any objects on top of a closed lid.
WARNING
• WEAR SAFETY GLASSES when removing or repositioning
the slides.
• DO NOT pull the unit, push it when moving. Pushing the unit will
prevent serious ankle and foot injuries.
• USE THE BRAKES when not moving this product. This will
prevent the product from rolling.
• DO NOT alter this product in any manner. For example, do not
weld external lockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing drawers, the cover or doors.
Remove hands before the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift,
or to be towed with any mechanical devices.
• Do not exceed the maximum weight capacity for each drawer
or shelf.
• This product should be empty when transporting by vehicle.
Properly secure when transporting.
• DO NOT exceed maximum product weight, including contents.
See Capacities for more information.
• As with all metal products, this product can contain burrs and
sharp edges. Wear protective gloves during assembly.
• Use adequate manpower when assembling and moving this
unit. Failure to do so may cause personal injury or product
damage.
THIRD ANGLE PROJECTION
REV.
ECO#
DATE
BY
DETAILS / DESCRIPTION
Waterloo Industries, Inc.
SEDALIA, MISSOURI
PART NO.
SHEET
REVISION
DRAWING NO.
DRAWING IS DERIVED FROM SOLIDWORKS CAD MODEL AND IS PRODUCED IN ACCORDANCE WITH ASME Y14.100
AND RELATED DOCUMENTATION PRACTICES
THIS DRAWING AND THE INFORMATION IT CONTAINS IS THE PROPRIETARY PROPERTY OF WATERLOO
INDUSTRIES, INC. AND MAY NOT BE REPRODUCED WITHOUT WRITTEN PERMISSION FROM WATERLOO
INDUSTRIES, INC. PRODUCT ENGINEERING.
SCALE
SIZE
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGLE
1
2 PLACE
.03
3 PLACE
.015
OTHER TOLERANCES PER DWG 16856
INTERPRET DIMENSIONS AND
TOLERANCES PER ASME Y14.5M
TITLE
DRAWN BY
DATE:
MATERIAL
Assem1
-
who
9/15/2016
1:12
SHEET 1 of 1
B
USEDINDWG
updateme
-
with SMART LOCK
SAFETY
SERVICE PARTS
CAPACITIES
MAINTENANCE