Bosch B920 User Quick Reference Manual

Download User quick reference manual of Bosch B920 Keypad for Free or View it Online on All-Guides.com.

Brand: Bosch

Category: Keypad

Type: User quick reference manual

Model: Bosch B920 , Bosch B921C

Pages: 2

Download Bosch B920 User quick reference manual

Bosch B920 User quick reference manual - Page 1
1
Bosch B920 User quick reference manual - Page 2
2
1 | Overview
Command Function
[CMD] 0 Bypass
[CMD] 0 0 Unbypass
[CMD] 1 All on (with delay)
[CMD] 1 1 All On, Instant
[CMD] 2 Part On, Instant
[CMD] 3 Part On (with delay)
[CMD] 4 Silence Trouble Sounders
[CMD] 4 0 See Alarms
[CMD] 4 1 Test Report
[CMD] 4 2 Status Report
[CMD] 4 3 RPS Answer
[CMD] 4 4 Intrusion Walk Test
[CMD] 4 5 Date and Time
[CMD] 4 6 Door Control Menu
[CMD] 4 7 Reset Sensors
Command Function
[CMD] 4 9 Change Display
[CMD] 5 0 Go to Area
[CMD] 5 1 Extend Close
[CMD] 5 SKED Menu
[CMD] 5 3 Delete User
[CMD] 5 4 Output Change Menu
[CMD] 5 5 Change Passcode
[CMD] 5 6 Add User
[CMD] 5 7 Default Text
[CMD] 5 8 Fire Walk Test
[CMD] 5 9 Show Revision
[CMD] 6 Watch Mode
[CMD] 7* Special Alert _____________
[CMD] 8 Open Main Menu
[CMD] 9* Special Alert _____________
GAS
A1 Lobby
Ready to turn on
Navigation keys
These keys turn on backlighting and emit the keypress
tone (short beep).
PREV and NEXT
Use [PREV] (previous) and [NEXT] to go through alarm points, lists, and text.
ESC
Use [ESC] (Escape) to exit from menus and functions, or to delete letters or numbers.
ENTER
Use [ENTER] after entering your passcode, to select an item, or to enter Yes to
a request.
CMD
Use [CMD] with one or two number keys to operate
functions.
Intrusion function keys
Use these keys to turn on keypad backlighting. The
keypress tone (short beep) emits.
ALL
Press to turn the intrusion system All On.
BYPASS
Press to open the menu to bypass points.
PART
Press to turn the intrusion system Part On.
MENU
Press to open the keypad’s Main menu.
Status indicators
The indicators show how your system is
operating.
Ready to arm
The system is ready to turn on (arm). (24 hour points, such
as fire points, are always monitored.)
On (armed)
The system is on (armed).
Gas
A gas alarm exists.
Power
The system has AC (Mains) power.
Programmable function keys
Hold these keys to activate user functions, (as
configured by your security company) and to turn
on backlighting. The keypad emits the keypress tone
(short beep).
HELP
Use [HELP] to get keypad Help in your display language.
Trouble
A trouble condition exists.
*As configured by your security company.
NOTICE! The Access menu and the option to configure a card are available on compatible security systems only.
You can operate functions
with the [CMD] key plus one
or two digits.
Press the [CMD] key, then
enter the command.
Press [CMD]. Then use
[PREV] or [NEXT] to move
through commands. Press
[ENTER] to activate it.
Menu tree
[CMD] [8] shows the menu tree. Each option has a number. Touch the number for the desired menu, or use [PREV] or [NEXT]
to review your options, and then touch [ENTER] when you see the desired option.
Commands
Alphanumeric display
or