Automation Direct T1K–DEVNETS User Manual
Download Operation & user’s manual of Automation Direct T1K–DEVNETS Controller for Free or View it Online on All-Guides.com.
Brand: Automation Direct
Category: Controller
Type: Operation & user’s manual for Automation Direct T1K–DEVNETS
Pages: 64
Download Automation Direct T1K–DEVNETS Operation & user’s manual
Errata Sheet
Page 1 of 1
Product Family: Terminator I/O
Manual Number T1K-DEVNETS-M
Revision and Date 1st Edition; November 2001
Date: December 2018
This Errata Sheet contains corrections or changes
made after the publication of this manual.
Errata Sheet
Changes to Chapter 2. Installing the T1K–DEVNETS Base Controller
Page 2-9. Configuring the Controller; Status Indicators
Replace the top portion of the table [MS (Module Status) Indicator] with the table below.
Two new rows were added for Flashing Green and Flashing Red.
No changes were made to the lower portion of the table [NS (Network Status) Indicator].
MS (Module Status) Indicator
Indication Status
OFF No power to Controller. Check wiring.
ON (Green) Power applied to Controller, no fault
ON (Red) Critical Controller Fault
Flashing Green In Firmware Update Mode
Flashing Red I/O system error
Missing module error
New module present error
I/O diagnostic error