Arkbird AAT Instructions Manual
Download Instructions manual of Arkbird AAT GPS for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
Arkbird
- 1 -
Product introduction:
ARKBIRD-AAT (Auto Antenna Tracker) is an antenna tracking system designed for long distance
transmission. It greatly improves the transmission range by pointing the high-gain ground panel antenna to your
plane at every moment.
Six innovative designs give you the best experience:
1. Two sets of sensors for dual-coupling correction equipped with magnetic compass and inertial navigation
compass (gyroscopes), ultra high-precision pointing;
2. Plug and play; work with Arkbird OSD to make a weld-free plug assembler; advanced full-automatic
calibration algorithm for one step calibration;
3. Two-channel transmission on video and audio, dual reliability (50hz superimposed on video channel, 10hz
on audio channel);
4. Integrated suction cup mounts and tripod mounting hole , Super tiny (PTZ body 11cm * 8.8cm * 3.9cm),
high-quality powerful steering engine (max load 2kg), 360-degree slip ring without winding;
5. Take-off point coordinates can be automatically saved after powering-on; dynamic positioning can be
realized by using the GPS interface in the ground module, which supports movement tracking (e.g. It can
be used when driving or emergency-landed plane searching);
6. 9600-115200 Self-adaptive GPS Baud rate without any setting, which is compatible with all kinds of FPV
equipment;
7. Reserving an interface for upgrade, and more functions for continuous upgrades.
Airborne module: Voltage: 2S-4S（7～16.8V） Peak current: 200mA@12V
Ground module: Voltage: 3S（12V） Peak current: 800mA@12V
Attention:
Please read the instructions and "Frequently Asked Questions" at the end of our instructions
carefully before using it. Pay attention and be sure to check the details and wiring before powering
on. Incorrect wiring may cause permanent damage to the device!