Cisco 15310-EIA-HD-A Installing
Download Installing of Cisco 15310-EIA-HD-A Recording Equipment for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Recording Equipment
Type: Installing
Model: Cisco 15310-EIA-HD-A , Cisco 15310-EIA-HD-B
Pages: 6
1
2
3
4
5
6
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the High-Density Electrical Interface
Assemblies on the Cisco ONS 15310-MA
Product Name: 15310-EIA-HD-A, 15310-EIA-HD-B
This document explains how to install and remove high-density electrical interface assemblies (EIAs)
on the Cisco ONS 15310-MA.As appropriate, use this document in conjunction with the
Cisco ONS 15310-CL and Cisco ONS 15310-MA Procedure Guide, the Cisco ONS 15310-CL and
Cisco ONS 15310-MA Reference Manual, and the Cisco ONS 15310-CL and Cisco ONS 15310-MA
Troubleshooting Guide when working with the high-density EIAs.
This document contains the following sections:
• High-Density EIA Description, page 1
• Install the High-Density EIAs, page 3
• Related Documentation, page 5
• Obtaining Documentation and Submitting a Service Request, page 5
High-Density EIA Description
High-density EIAs are attached to the ONS 15310-MA shelf assembly backplane to provide up to 168
transmit and receive DS-1 connections through six Champ connectors per side (A and B) or six transmit
and receive DS-3/EC-1 connections through six BNC connectors per side. The EIAs are designed to
support DS-1, DS-3, and EC-1 signals. The appropriate cable assembly is required depending on the type
of signal.
Note The HD expansion connectors on the high-density EIA are not supported in Software Release 7.0.x and
earlier.
You can install EIAs on one or both sides of the ONS 15310-MA. As you face the rear of the shelf
assembly, the right side is the A side (15310-EIA-HD-A) and the left side is the B side
(15310-EIA-HD-B).