• Home
• Brands
• Dexter Laundry Manuals
• Dexter Laundry T-1450
• Dexter Laundry T-350 Operator's Manual

Dexter Laundry T-350 Operator's Manual

Download Operator's manual of Dexter Laundry T-1450 Laundry washers, Washer for Free or View it Online on All-Guides.com. This version of Dexter Laundry T-1450 Manual compatible with such list of devices, as: T-1450, T-650, T-950, T350, T450 Express

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

8514-290-001 REV B page 1

INDUSTRIAL WASHERS

MODEL T-350/450/650/750/950/1450

EXPRESS ON-PREMISE O-SERIES CONTROL

OPERATOR’S MANUAL

INSTALLATION & OPERATION

INSTRUCTIONS

Please read this information and retain for reference.

WARNING - THIS WASHER IS EQUIPPED WITH DEVICES AND FEATURES RELATING TO ITS SAFE

OPERATION. TO AVOID INJURY OR ELECTRICAL SHOCK, DO NOT PERFORM ANY SERVICING UNLESS

QUALIFIED TO DO SO.

IT IS THE RESPONSIBILITY OF THE OWNER TO CHECK THIS EQUIPMENT ON A FREQUENT

BASIS TO ASSURE ITS SAFE OPERATION.

A machine should NOT be allowed to operate if any of the following occur:

- Excessively high water level.

- If machine is not connected to a properly grounded circuit.

- If the door does not remain securely locked during the entire cycle.

- Vibration or shaking from an inadequate mounting or foundation.

WARNING - SAFETY PRECAUTIONS

- Always shut off power and water supply before servicing.

- Do not overload the washer.

- Do not open door when cylinder is in motion or it contains water.

- Do not bypass any safety devices of this washer.

- Do not use volatile or flammable substances in or near this washer.

- Keep all panels in place. They protect against shock and injury and add rigidity to the washer.

PREVENTIVE MAINTENANCE REQUIREMENTS

DAILY

- Check that the loading door remains securely locked and cannot be opened during an entire

cycle.

- Check the water connections for leaks.

- Clean the top, front, and sides of the cabinet to remove residue.

- Clean the soap dispenser and lid and check that all dispenser mounting screws are in-place and

tight.

- Check the drain valve for leaking and that it opens properly.

- Check the loading door for leaks. Clean the door seal of all foreign matter.

- Leave the loading door open to aerate the washer when not in use.

QUARTERLY

- Make sure the washer is inoperative by switching off the main power supply.

- Check the V-belts for wear and proper tension.

- Clean lint and other foreign matter from around motor.

- Check all water connections for leaks.

- Wipe and clean the inside of the washer and check that all electrical components are free of

moisture and dust.

- Remove and clean water inlet hose filters. Replace if necessary.

- Check anchor bolts. Retighten if necessary

IMPORTANT: Replace any and all panels that were removed to perform daily and/or quarterly

maintenance.