Danby DPC6012BLS Owner's Use And Care Manual

Download Owner's use and care manual of Danby DPC6012BLS Wine Cooler for Free or View it Online on All-Guides.com.

Brand: Danby

Category: Wine Cooler

Type: Owner's use and care manual for Danby DPC6012BLS

Pages: 21 (0.45 Mb)

Download Danby DPC6012BLS Owner's use and care manual

Danby DPC6012BLS Owner's use and care manual - Page 1
1
Danby DPC6012BLS Owner's use and care manual - Page 2
2
Danby DPC6012BLS Owner's use and care manual - Page 3
3
Danby DPC6012BLS Owner's use and care manual - Page 4
4
Danby DPC6012BLS Owner's use and care manual - Page 5
5
Danby DPC6012BLS Owner's use and care manual - Page 6
6
Danby DPC6012BLS Owner's use and care manual - Page 7
7
Danby DPC6012BLS Owner's use and care manual - Page 8
8
Danby DPC6012BLS Owner's use and care manual - Page 9
9
Danby DPC6012BLS Owner's use and care manual - Page 10
10
Danby DPC6012BLS Owner's use and care manual - Page 11
11
Danby DPC6012BLS Owner's use and care manual - Page 12
12
Danby DPC6012BLS Owner's use and care manual - Page 13
13
Danby DPC6012BLS Owner's use and care manual - Page 14
14
Danby DPC6012BLS Owner's use and care manual - Page 15
15
Danby DPC6012BLS Owner's use and care manual - Page 16
16
Danby DPC6012BLS Owner's use and care manual - Page 17
17
Danby DPC6012BLS Owner's use and care manual - Page 18
18
Danby DPC6012BLS Owner's use and care manual - Page 19
19
Danby DPC6012BLS Owner's use and care manual - Page 20
20
Danby DPC6012BLS Owner's use and care manual - Page 21
21
Each cooling compartment of your Party Center (left & right)
is independently controlled. To set the temperature;
1) Connect the power cord to a properly grounded outlet. In
the event of a power interruption, all previous temperature
settings are automatically erased and each compartment
will default to a preset temperature setting of:
12°C (54°F) Wine storage zone (left upper zone)
-7°C (14°F) –Icemaker zone (left lower zone)
7°C (45°F) –Beverage zone (right zone)
Temperature set range:
4-18°C (39-64 °F) – Wine storage zone (left upper zone)
-7°C/-13°C (9°F/19°F) – Icemaker zone (left lower zone)
4-18°C (39-64 °F) – Beverage zone (right zone)
2) When you set the temperature for wine storage zone (left
upper zone) and beverage zone (right zone), push
“UP/DOWN” button to adjust setting temperature. Push
“UP” or “DOWN” button one time, and the temperature will
increase or reduce by one degree. When you push the
“UP/DOWN” buttons to set the temperature, the digital
LED will flash and display setting temperature, and after 5
seconds it will go back to display the actual ambient
temperature.
3) When you start/shut off ice maker function, push the
“ON/OFF” button; the ice maker will commence operation
upon pushing the “ON” button, and the temperature inside
the ice maker zone will be -13°C (9°F); when the light
adjacent to the ON/OFF buttons is illuminated, this
indicates the ice maker is operational. To turn the ice
maker off, press the ON/OFF button again and the light
adjacent to the ON/OFF button will cease to illuminate-
Upon shutting off the ice maker, the LED display will flash
and display the set temperature, and after 5 seconds of
flashing, will go back to displaying the actual temperature.
When the ice maker is not in operation, the temperature
will be -7°C (19°F).
4) To view the "set" temperature at any time, press and hold
the corresponding button for approximately 5
seconds; the "set" temperature will temporarily "flash" in
the LED display for 5 seconds:
Flashing LED = Set Temperature
Steady LED= Cabinet Temperature
• To prevent damaging the door gasket, make sure to have
the door all the way opened when pulling shelves out of the
rail compartment.
• For easy access to the storage content, you must pull the
shelves approximately 1/3 of the way out of the rail
compartment;
• To fit or remove the shelf, tilt the shelf as per Fig.B, and
simply pull out, or push in the shelf until it sits on the
support brackets securely.
Fig. B
• Pull out the ice maker box in order to remove
ice easily.
NOTE:
• If the unit is unplugged, power lost, or turned off, you
must wait 3 to 5 minutes before restarting the unit. If you
attempt to restart before this time delay, the Party Center
will not start.
When you use the Party Center for the first time or restart
the Party Center after having been shut off for a long
time,there could be a few degrees variance between the
temperature you select and the one indicated on the LED
readout. This is normal and it is due to the length of the
activation time. Once the Party Center is running for a few
hours everything will return to normal.
OPERATING INSTRUCTIONS
SETTING THE
TEMPERATURE
SHELF INSTRUCTIONS
ICE MAKER INSTRUCTIONS
4