Panasonic CY-11A Instruction Manual

Download Instruction manual of Panasonic CY-11A Kitchen Appliances for Free or View it Online on All-Guides.com. This version of Panasonic CY-11A Manual compatible with such list of devices, as: CY-11A, CY-11B, CY-21, CY-21-PN

Panasonic CY-11A Instruction manual - Page 1
1
Panasonic CY-11A Instruction manual - Page 2
2
INSTRUCTION MANUAL
Thank you very much for purchasing Panasonic products. Please read this Instruction Manual carefully and thoroughly for
the correct and optimum use of this product. Kindly keep this manual in a convenient place for quick reference.
I/O CIRCUIT DIAGRAMS
1
Notes: 1)
2)
The emitter of the thru-beam type sensor does not incorporate the
output and the control input. When the mating cable is connected
to the pigtailed type, the color of the control input wire is white.
Test input (emission halt input) is incorporated only on the
emitter of the thru-beam sensor. When the mating cable
is connected to the pigtailed type, its color is white.
BME-CY11C No.0038-34V
CY-11A
AC supplyLight-ON type
CY-11B
AC supplyDark-ON type
CylindricalThru-beam type
Photoelectric Sensor
CY-21
DC supplyNPN output type
CY-21-PN
DC supplyPNP output type
٨
٨
Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use products which meet standards, such as
OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country.
WARNING
Symbols...D1, D2: Reverse supply polarity protection diode
Z
D1, ZD2: Surge absorption zener diode
T
r1: NPN output transistor
T
r2: PNP output transistor
Note: The output does not incorporate a short-circuit protection circuit. Do not connect it directly to a power supply or a capacitive load.
٨
AC supply type / CY-11A, CY-11B
٨
DC supply type / CY-21, CY-21-PN
1: AC IN
2:
Not connection
3: AC IN
4: Output (Emitter: Not connection)
1
2
3
4
<Connector pin position (Pigtailed type)>
1: +V
2: Test input (emission halt input)
or control input
3: 0V
4: Output
(Emitter: Not connection)
1
2
3
4
AC supply type / CY-11A-J, CY-11B-J
DC supply type / CY-21-J, CY-21-PN-J
NPN output type
Load
+
-
10 to 30V DC
(
Black / 4) Output (Note 1)
(Violet / 2) Test input
(emission halt input) (Note 2)
(Pink / 2) Control input (Note 1)
(Blue / 3) 0V
(Brown / 1) +V
Color code / Connector pin No. of the pigtailed type
Sensor circuit
Internal circuit Users' circuit
D1
100mA max.
*1
ZD1
T
r1
*1
Non-voltage contact or NPN open-collector transistor
Test input (emission halt input)
Low (0 to 2.5V): Emission halt
High (6 to 30V, or open): Emission
Control input
Low (0 to 1.5V): Dark-ON
High (6 to 30V, or open): Light-ON
or
PNP output type
+
-
10 to 30V DC
Sensor circuit
Internal circuit Users' circuit
D2
ZD2
100mA max.
Tr2
(Black / 4) Output (Note 1)
(Violet / 2) Test input
(emission halt input) (Note 2)
(Pink / 2) Control input (Note 1)
(Blue / 3) 0V
(Brown / 1) +V
Color code / Connector pin No. of the pigtailed type
*2
Load
*2
Non-voltage contact or PNP open-collector transistor
Test input (emission halt input)
Low (0 to 1.5V, or open): Emission
High (3 to 30V): Emission halt
Control input
Low [(supply voltage - 6V) or less, or open]: Light-ON
High [(supply voltage - 1.5V) or more]: Dark-ON
or
Emitter
(Brown / 1) AC IN
(Blue / 3) AC IN
Color code / Connector pin No. of the pigtailed type
Sensor circuit
Internal circuit Users' circuit
24 to 240V AC
%
+10
-
15
Receiver
Load
(Brown / 1) AC IN
(Blue / 3) AC IN
(Black / 4) Output (Note)
Color code / Connector pin No. of the pigtailed type
Sensor circuit
Internal circuit Users' circuit
24 to 240V AC
%
+10
-
15