Aethra TGA1012 Specifications

Download Technical specifications of Aethra TGA1012 Network Hardware, Switch for Free or View it Online on All-Guides.com.

Brand: Aethra

Category: Network Hardware , Switch

Type: Technical specifications for Aethra TGA1012

Pages: 2 (0.16 Mb)

Download Aethra TGA1012 Technical specifications

Aethra TGA1012 Technical specifications - Page 1
1
Aethra TGA1012 Technical specifications - Page 2
2
FEATURES AT A GLANCE
Exhaustive tests over the disturbed access by using an
external device like D2000
PRO
E1 frame alarm signalling
Modular system, up to 72 PRI access under
constant monitoring
Integrated impedance adaptation 75 - 120 Ohm
Optional remote management by PC
Optional matrix for automatic access switching
to increase the system management power
Technician’s time optimization and money saving
OVERVIEW
The Aethra
®
modular system TGA1012 for alarm signalling over E1/G.704
lines, is the best solution for continuous monitoring aimed to carriers, call
center, ISPs, public offices and those who need constant monitoring of
their lines. The system is modular as the basic unit may be equipped with
a variable number of interface modules in order to manage up to a maximum
of 12 primary lines. Moreover, these units may be connected in cascade
through RS485 serial port, up to a maximum of 6 units for a total number of
72 lines.
In addition to the alarms signalling feature, TGA1012 allows the conversion
between interfaces 120 Ohm - 75 Ohm and vice versa, both Network side
and Terminal side without any extra piece of hardware.
By using external devices, e.g. the D2000
PRO
, it is possible to be connected to
one of the access under control and carry out tests over the line both
toward the network and toward the terminal, as well as performing a monitor
test in high impedance.
Besides, the optional remote management software, will allow you to control
the status of the lines connected to TGA1012, reproducing the device
accurately on the screen of your PC.
The optional matrix MTX200, will improve the system management allowing
remote automatic access switching, in order to monitor and test the
problematic lines using just one external test instrument.
TGA1012
PRI MONITORING AND ALARM SIGNALLING SYSTEM
Modular system
1 access per module, 12 modules per Rack and
up to 6 Racks per system
PRI E1/G.704 monitoring test set
Continuous local and remote alarms signalling
Flexible management
E1 streams monitoring by remote side