Siemens Landis & Staefa RAV12 Series Operating Instructions
Download Operating instructions of Siemens Landis & Staefa RAV12 Series Temperature Controller for Free or View it Online on All-Guides.com.
Brand: Siemens
Category: Temperature Controller
Type: Operating instructions for Siemens Landis & Staefa RAV12 Series
Pages: 2
Download Siemens Landis & Staefa RAV12 Series Operating instructions
1
2
Operating instructions
Landis & Staefa RAV12…
RAV12 - the temperature controller that allows you to set the ideal room temperature at the time you want.
You can either rely on the factory settings or make settings tailored to your personal needs.
Getting started
13
12
11
10
9
8
7
4
2
1
24
23
22
21
20
17
14
15
16
18
19
6
5
3
10
15
20
25
30
5
5
10
15
20
25
30
°C
2226Z03E
°C
AUTO
Position for 24-hour
time switch AUZ3.1
or weekly time switch
AUZ3.7
Tappet positions
on time switch
Tappet tilted
outward for
normal temperature
Tappet tilted
inward for
economy temperature
Setting knob for
normal temperature
Setting knob for
economy temperature
LED
Operating mode
selector
Heating periods
according to
tappet settings
on time switch
Continuous
normal temperature
Continuous
economy temperature
Standby with
frost protection
The controller is supplied with factory-set switching patterns, switching times and temperatures.
To commission it, proceed as follows:
• As soon as connected, the controller switches itself on. Caution: 230 V!
• Set the correct time of day
(with the weekly time switch check the weekday!)
. Make readjustments if
necessary.
• Set the operating mode selector to the required position (e.g. AUTO
).
• Fold up operating instructions again, place them back into position and close the cover again.
Do you want to use automatic operation?
Move the operating mode selector to
the position automatic mode. This
ensures heating according to the
patterns set on the time switch.
Do you require normal temperature?
Move the operating mode selector to
«Normal temperature». This ensures
continuous heating to the normal
temperature.
Do you require economy temperature?
Move the operating mode selector to
«Economy temperature». This ensures
continuous heating to the economy
temperature.
Do you require standby with frost
protection?
Move the operating mode selector to
«Standby». In that case, heating is
provided only when the room
temperature falls below the preset frost
protection limit (5 °C).
Do you feel too warm or too cold?
10
15
20
25
30
5
°C
With the upper setting knob the normal
temperature
can be adjusted from 5
to 30 °C in steps of approx. ±1 °C.
5
10
15
20
25
30
°C
With the lower setting knob the
economy temperature
can be
adjusted from 5 to 30 °C in steps of
approx. ±1 °C.