Amerec 6x9 Waterproof Speaker Installation Instructions

Download Installation instructions of Amerec 6x9 Waterproof Speaker Speakers for Free or View it Online on All-Guides.com.

Amerec 6x9 Waterproof Speaker Installation instructions - Page 1
1
Amerec 6x9 Waterproof Speaker Installation instructions - Page 2
2
Amerec 6x9 Waterproof Speaker Installation instructions - Page 3
3
Amerec 6x9 Waterproof Speaker Installation instructions - Page 4
4
4211-197 08-24-12
6 x 9 Waterproof Speakers
Installation Instructions
Ratings
Impendance: 4 Ω
Watts: 90W max
Min. Temperature: 32°F (0°C)
Installation
1. Cut a speaker mounting hole in the mounting surface using template (see pages 3 & 4).
2. Connect the speaker’s two SPK terminals to the sound source. Insure that the positive terminal
of the speaker (red +) is connected to the positive (+) terminal of the sound source. This is very
important: if the speakers are connected out of phase the sound quality will be affected.
3. If using the speaker’s LEDs - Connect the speaker’s two LED terminals: connect the positive
LED terminal (red +) to a +12VDC control line and the negative (-) LED terminal to ground.
Front Rear
Ground from iPod Dock/Harness
Triggered +12VDC from iPod Dock/Harness
Speaker (-) from iPod Harness
Speaker (+) from iPod Harness
LED Lights