Acuity 6SL Quick Start Manual
Download Quick start manual of Acuity 6SL Speakers for Free or View it Online on All-Guides.com.
1
QUICK-START
GUIDE FOR
6” SPEAKER
DOWNLIGHT
STOP
READ THESE
INSTRUCTIONS PRIOR TO
INSTALLATION
CAREFULLY FOLLOW
INSTRUCTIONS FOR PROPER
INSTALLATION
Stream music from one Bluetooth®
enabled device at a time
App not required for use
Connect up to 8 speaker lights
REQUIRE TOOLS (NOT INCLUDED):
• Safety Glasses
• Gloves
• Ladder
U6SL-QSG_Rev. A, 10/17
©2017 Acuity Brands Lighting, Inc. All rights reserved.
STEP 0: ACTIVATE
BATTERY OF EACH UNIT
TO BE INSTALLED
1. Remove Protective Tab(s) from
Battery Cover (s) on back of Speaker(s).
2. Confirm Orange Connector of Power Plug
is connected to the fixture’s mating Orange
Connector, and then connect the plug to an
AC120V electrical outlet. The unit will turn on
automatically and you will hear an audible
tri-tone, low-to-high chime. The PAIR Button will
start blinking GREEN. This indicates the Speaker
battery has been activated.
3. Press and hold the ON / OFF Button until you
hear an audible 4-tone, high-to-low chime to
turn OFF the Speaker.
4. Remove Power Plug from the AC120V
electrical outlet, then disconnect the plug from
the fixture.
STEP 1: PAIR MASTER UNIT
1. Confirm the unit is in MASTER MODE by
ensuring the S-M Switch is toggled towards the
letter “M” on the back of the Speaker .
2. Wake the Speaker from SLEEP MODE by
pressing the ON / OFF Button for 2 seconds
until you hear an audible tri-tone, low-to-high
chime. The PAIR Button will start blinking
GREEN, and the S-M Indicator Light will blink
BLUE on the front of the module under the
speaker grill. This indicates the speaker is in
MASTER MODE and is ready to pair.
3. Place your Bluetooth® Enabled Device in
SEARCH MODE, then select the device called
Down Light Speaker to pair to the Speaker.
4. Pairing complete with an audible BEEP
sound and the S-M Indicator Light will become
a solid BLUE light. Play music from your Device
to check operation of the MASTER Unit. To stop
playing music, pause or turn music off on your
Device. You do not need to turn the unit OFF.
STEP 2: SYNC SATELLITE
UNITS (OPTIONAL)
1. Activate SATELLITE MODE by toggling the S-M
Switch on each SATELLITE Unit towards the letter
“S” of the “S-M” icon.
2. Turn ON the SATELLITE Unit by pressing the ON
/ OFF Button for 2 seconds. The PAIR Button will
illuminate GREEN, with an audible BEEP sound. The
S-M Indicator Light under the speaker grill will also
illuminate GREEN indicating SATELLITE MODE.
3. While the MASTER Unit is still playing music,
press the PAIR Button on the SATELLITE Unit
until it makes an audible BEEP sound and starts
quickly flashing GREEN. Then separately press
and hold the PAIR Button on the MASTER Unit.
Once speakers pair, the SATELLITE Unit will make
an audible BEEP sound and should sync up with
the MASTER Unit within 20 seconds, resulting in
music coming from both units simultaneously.
The PAIR Button on both units will illuminate to a
solid GREEN light and will remain solid GREEN
as long as the units are paired.
4. Repeat Steps for up to seven SATELLITE Units.
STEP 3: INSTALL
Ensure input power is 120V, 60Hz, supply wires
are rated for at least 90°C (194°F), and power
is disconnected at breaker. Install each unit to
housing with minimum enclosure of 6” diameter
by 6” height.
TIPS:
• To maximize range of units, centrally locate
Master Unit between Satellite Units.
M
a
x
. 3
0
’ (9
m
)
SATELLITE UNIT A
Max. 60’ (18m)
SATELLITE UNIT B
Max. 60’ (18m)
MASTER UNIT
Max. 120’ (36m) Audio Range
• For stereo sound effect, install a minimum of 2
units in the room (1 Master & 1 Satellite): 1 unit
on the left side and the other on the right side.
• For surround sound effect, install a minimum
of 4 units in the room (1 Master & 3 Satellites):
1 unit in front, 1 unit in the back, 1 unit on the
left side, and 1 on the right side.
Stereo Sound Effect Surround Sound Effect
STEP 4: ENJOY
Reconnect power and enjoy light and music!