JLab CRASHER User Manual
Download Operation & user’s manual of JLab CRASHER 2.0 Portable Speakers, Speakers for Free or View it Online on All-Guides.com.
Brand: JLab
Category: Portable Speakers , Speakers
Type: Operation & user’s manual
Model: JLab CRASHER 2.0 , JLab Crasher
Pages: 3
1
2
3
JLab
Crasher
AUX IN USB IN
METAL BODY PORTABLE BLUETOOTH
®
SPEAKER
USER MANUAL
CRASHER
VOLUME DOWN
VOLUME UP
USB OUTPUT
PHONE
POWER
SWITCH
USB INPUT
AUX INPUT
CHARGING
LED INDICATOR
PAIR / BATTERY
LED INDICATORS
BLUETOOTH /
BATTERY CHECK
TRAVEL
BAG
USB POWER
ADAPTER
AUX
CORD
USB OUT
CHARGING
Note: For optimum performance, charge overnight with Micro USB cable prior to using.
1 Before charging, it is recommended you turn off the Crasher.
2 Connect the Crasher to your computer or wall outlet using
the provided Micro USB cable and/or 5V power adapter.
3 The indicator light on the front of the Crasher will turn red indicating charging is in
progress. When it turns green, charging is complete. Allow about 6 hours to fully charge.
Check Battery Life
The speaker is designed with a smart battery check feature for your convenience.
Press the Battery Check button once to show the current battery capacity.
4 LEDs = app. 100%
/ 3 LEDs = app. 75% / 2 LEDs = app. 50% / 1 LED = app. 25% (needs charging)
POWER
+
BLUETOOTH FUNCTION
1 Once the Crasher is fully charged, slide the Power button to the right to power on.
LED lights and sound should further indicate that the Crasher is on.
2 Press the Bluetooth/Battery Check button and hold for about 5 seconds
or until the 4 LEDs flash.
3 Use your mobile device to search for the Bluetooth signal. The Crasher will
appear on your Bluetooth device list. Enter PIN code “0000” if prompted.
4 When the Bluetooth connection is made, the first LED will flash slowly.
Please allow 10-20 seconds for your device to connect. The unit will sync
to play songs on your device when connected successfully.
ACCESSORIES
SPEAKER PORTS / BUTTONS
MICRO USB
CABLE
AUX IN USB IN
AUX IN USB IN
OR