Epson LABELWORKS PX LW-PX900 User Manual

Download Operation & user’s manual of Epson LABELWORKS PX LW-PX900 Handhelds, Label Maker for Free or View it Online on All-Guides.com.

Epson LABELWORKS PX LW-PX900 Operation & user’s manual - Page 1
1
Epson LABELWORKS PX LW-PX900 Operation & user’s manual - Page 2
2
Read this document carefully to use this product
safely and correctly. If your product is faulty, please
read the included warranty card and contact the
store you purchased it from. If you require further
assistance, contact your local K-Sun customer
support center.
Please also visit us at www.K-Sun.com for help and
support.
Portions of this software are copyright 2015 The
FreeType Project (www.freetype.org). All rights
reserved.
International ENERGY STAR® Compliance
Statement
The purpose of the International ENERGY STAR®
Program is to promote the development and
popularization of energy-ecient oce equipment.
As an ENERGY STAR® Partner; Seiko Epson
Corporation has determined that this product meets
the ENERGY STAR® guidelines for energy eciency.
The included items dier depending on the type of product package you purchased. Use the following table to check the items.
If you would like to purchase an item that is not included or have purchased a package other than one in the following table, see
the separate sheet included with the product.
No. Included item name
Package name
LW-PX900 Full kit LW-PX900 Lite kit LW-PX900 PC kit
1 LW-PX900
2 AC adapter
3 Li-ion battery (C52CE97010) - -
4 USB cable
-
5 Label Editor Professional CD-ROM -
6 Magnetic attachment (C52CE98010) - -
7 Documents *
* You can download LW-PX900 Instruction Manual (PDF) from www.K-Sun.com.
User’s Guide
Notation used in this manual
WARNING
Indicates information that, if ignored, could
possibly result in serious personal injury or even
death due to incorrect handling.
CAUTION
Indicates information that, if ignored, could
possibly result in personal injury, physical
damage, or damage to equipment due to
incorrect handling.
Attention
Indicates important information about
LW-PX900.
MEMO
Indicates additional information and points which
may be useful to know regarding a topic.
, , ,
Indicates a title and page with more detailed
information.
Shows an image of the label to be used as an
example.
, ,
Indicates the buttons on LW-PX900.
"Name"
Indicates the menu items, messages shown on
the display, or the name of a manual. Example:
"On", "Start print?"
Body
Dimensions Approx. 136 (W) x 295 (D) x 97 (H) (mm)
Weight
Approx. 1,250 g (excluding batteries, tape cartridge)
Usage conditions
Operating temperature 5 to 35 degrees C
Storage temperature -10 to 55 degrees C
Supported tape width
4 mm, 6 mm, 9 mm, 12 mm, 18 mm, 24 mm, 36 mm
Power supply
Battery
Li-ion battery x 1 / AA alkaline battery x 6
AC adapter
Type AST1527Z1-1
Manufacturer Seiko Epson Corp.
Input AC100-240V, 0.4A, 50-60Hz
(dedicated adapter, power cable only)
Output DC15V, 2.7A
Total output power 40.5 W
Safety Instructions
For your safety, read the attached documents carefully to use this product
correctly. After you have read all instructions, keep this manual handy for
future reference and to make your concerns clear.
Items below indicate safety precautions to protect users, their surroundings
and their property from possible injury or damage.
Precautionary notations are categorised as follows according to personal
injury and damage to the equipment if the instructions are ignored or the
equipment is misused.
DANGER
This symbol indicates information that, if ignored, could possibly
result in serious or fatal personal injury. Take extra caution in
performing procedures with DANGER headings.
WARNING
This symbol indicates information that, if ignored, could possibly
result in serious personal injury or even death due to incorrect
handling.
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury, physical damage, or damage to equipment
due to incorrect handling.
The following describes the meaning of each symbol used in the
precautions.
This indicates an important reminder.
This indicates a prohibited item.
This indicates a mandatory procedure.
DANGER
When handling batteries
If any liquid from the battery gets into your eyes, promptly wash it
out with clean water for more than 10 minutes and consult your
doctor at once. If you do not, the liquied may cause loss of eyesight.
Never disassemble or modify the battery pack. This may cause re,
explosion, leakage, overheating or damage.
Do not expose the battery to re or heat it. This may cause re,
explosion, leakage, overheating or damage.
WARNING
When using the AC adapter and power cable
Do not use any AC adapter or power cable other than the dedicated
AC adapter and power cable. Do not use the AC adapter with other
than the specied voltage also. Otherwise, damage, overheating, re
or electric shock may occur.
Take the following precautions when handling the AC adapter and
power cable.
• Make sure to avoid octopus wiring.
• Make sure the plug is not dusty before inserting it into an outlet.
• Insert the plug rmly into the outlet.
• Do not hold the AC adapter or the plug with wet hands.
• Do not pull the power cable when disconnecting the plug. Be sure
to hold the plug when disconnecting it.
• Do not make any modication to the AC adapter or power cable.
• Do not apply strong shocks to or put a heavy object on the AC
adapter or power cable.
• Do not bend or twist the AC adapter or power cable forcibly.
• Do not place the AC adapter or power cable near a heater.
Do not use any damaged AC adapter or power cable. Otherwise,
damage, overheating or smoking may occur, which may result in re
or electric shock.
Do not touch the plug during thunderstorms.
When handling batteries
Keep the battery pack away from re or ame if it produces a strange
odor or leakage. Otherwise re or explosion may occur.
Should any battery liquid get on skin or clothing, promptly wash it
o with clean water. If you do not, the liquid may damage your skin.
Do not expose the battery to water. Do not allow water to contact
the terminals. This may cause re, overheating, or electric shock.
Keep batteries out of reach of children. They are extremely
dangerous if swallowed. Contact a doctor immediately if swallowed.
When using this product
Do not apply any strong force or shocks to the product such as
standing on, dropping or hitting it. Otherwise, the product may be
broken, which may result in re or electric shock. If it is damaged,
turn o the power immediately, unplug the AC adapter and remove
the batteries, and then contact the K-Sun customer support center.
Continuous use may result in re or electric shock.
Take care not to spill any beverage such as tea, coee or juice onto
the product, or to spray aerosol insecticide. It may cause malfunction,
re, or electric shock. If any liquid has been spilled on the product,
turn o the power, unplug the AC adapter and remove the batteries
immediately, and then contact the K-Sun customer support center.
Continuous use may result in re or electric shock.
Do not touch the printhead because it becomes very hot. Otherwise,
there is a risk of burns.
Do not open any covers other than the top cover or battery cover.
Doing so may result in re or electric shock. Always use the product
as instructed in this manual. Otherwise, damage or injury may occur.
Never modify or disassemble this product. Doing so may cause re
or electric shock. Do not carry out any operations not described in
this manual, or the product may break or cause injury.
If any of the following abnormalities is observed, turn o the power
immediately, unplug the AC adapter and remove the batteries, and
then contact the K-Sun customer support center.
• If smoke, strange odours or unexpected noises come from the
product
• If liquid or foreign objects get inside the product
• If the product has been dropped or damaged
Do not touch the tape eject slot, during printing or when the auto
cutter is in operation. Otherwise there is a risk of injury.
Others
Do not use or store the product, batteries, AC adapter, power cable,
or tape cartridges in the following places.
• In direct sunlight.
• Where it may become extremely hot such as in a vehicle with the windows
closed.
• Where it may become extremely hot such as near a heater or the
temperature becomes very unstable such as near the exhaust duct of
an air conditioner.
• Where the product may get wet due to a shower or rain such as in a
bathroom or outdoors.
• In a dusty place or where the product may be exposed to smoke or
steam such as near the kitchen or a humidier.
• On an unstable place such as on a shaky table or on an inclined
place.
• Where it might be subjected to vibration or shock.
• Near high-voltage power lines or something that generates a
magnetic eld.
Keep the plastic bags used to contain the product or this manual out
of reach of children. Children may suocate if they swallow them or
put their heads into the bags.
CAUTION
When handling batteries
If liquid leaks from a battery, wipe it o with a cloth and replace it
with a new one. If the liquid comes in contact with your skin, wash it
away with water immediately.
If the batteries are used incorrectly, they may cause leakage,
overheating, explosion, erosion, or damage to the product, which may
result in re or injury.
• Do not use new ones and old batteries together, or mix dierent types of
batteries.
• Use AA alkaline batteries.
• Use batteries in the correct directions.
• Take the batteries out immediately when they have no power
remaining.
• Take the batteries out if you do not use the product for a long time.
• Do not heat batteries or throw them in re or water.
• Do not pinch the batteries with metal tweezers or use any pointed
sharp metal object such as the tip of a mechanical pen or ball-point
pen when taking the batteries out.
When disposing of used batteries, make sure to follow the
regulations.
When using the AC adapter
Do not unplug the AC adapter while the product is in operation,
otherwise printing may not be successful.
Do not use the AC adapter in a small, conned space, or cover it with
a cloth. Otherwise, the AC adapter may overheat and deteriorate.
When using this product
Do not stand or put anything heavy on the product or place it on an
unstable place such as on a shaky table or on an incline. Otherwise,
the product may fall and cause injury.
To ensure safety, unplug this product before leaving it unused.
Before cleaning, make sure to unplug the AC adapter from the outlet,
and remove the batteries.
Do not use a moistened cloth or solvents such as alcohol, thinner or
benzine.
Do not block or insert objects into the supplied AC adapter socket or
the tape eject slot.
When handling tape cartridges
• Make sure to use a dedicated PX Tape.
• Some types of tape cannot be cut by the cutter. For the details, refer to the tape's
manual.
• Do not drop it or disassemble it. Doing so may cause damage.
• Do not pull out the tape forcibly by hand. But make sure to feed the tape
with
. Otherwise, the tape cartridge may be broken and unusable.
• Avoid using a tape cartridge without remaining tape. Doing so may
cause overheating of the printhead, which may result in damage or
malfunction.
MEMO
Tape cartridges contain ink ribbons in them. When disposing of tape
cartridges, make sure to follow the local regulations for disposal.
Other cautions
Notes on usage
• Do not touch the thermal head. Static electricity may damage the
thermal head.
• Do not plug in and unplug the AC adapter while printing. Power may be
cut o.
• The Li-ion battery cannot be charged while printing.
• Operate the keyboard gently.
• Take care not to cut your ngers when cutting the label with scissors.
• Do not attach a label on human bodies, living things, public facilities or
other people’s belongings.
• Be sure to turn the power o after use.
• Powering o message is displayed while turning o the product. Do not
remove the AC adapter until the message disappears.
• Be sure to replace batteries with the power turned o. If you replace the
batteries while the product is powered, les or data stored on it may be
deleted.
Recycling the Battery
Contains a lithium-ion battery. Must be recycled or disposed of properly.
MEMO
Do not disassemble the battery pack.
For American Users
The lithium-ion battery is recyclable. At the end of
its useful life, under various state and and local
laws, it is illegal to dispose of this battery into your
municipal waste stream. Please call
1-800-8-BATTERY for information on how to recycle
this battery.
Messages
This section explains the remedies when the following messages
appear on the display.
Check battery
Charge Li-ion!
The battery run out of power. Connect the AC
adapter to LW-PX900 and charge the battery.
For details,
"Charging the Li-ion battery"
Check battery
Change alkaline
The batteries run out. Turn o the power and
replace all batteries with new ones.
Cover open! Top cover is open. Close the top cover.
Insert tape Check if the tape cartridge is loaded or correctly
set.
For details,
"Installing a tape cartridge"
Check tape
cartridge
The loaded tape is not supported. Insert a correct
cartridge.
No more
sequence No.!
Only up to 2 sequence numbers can be inserted.
No more barcode! Only up to 2 barcodes can be inserted.
QR CODE too big! Perform either of the following:
Use a wider tape. Reduce the text or cell size.
Lower "ECC Level".
Overheated! The printhead is overheated. Turn o the power
and remove the tape cartridge, then leave the
product until it cools down.
Trash at slot
Remove trash
Tape remains in the tape eject slot. Remove the
tape.
Remove cut tape Unable to start printing because cut tape remains
in the tape eject slot. Remove the tape from the
tape eject slot.
Problem
Unable to charge Li-ion battery
Is the Li-ion battery correctly installed?
Check that the Li-ion battery is correctly installed.
Is the AC adapter securely connected?
Connect the AC adapter and the power cable rmly to the power
socket of the product, the AC adapter connector and the outlet.
Unable to detect the tape correctly
Is the tape cartridge correctly installed?
Check that the tape cartridge is correctly installed.
Is the label for detecting the tape cartridge clean?
If not, wipe the dirt o with a soft cloth.
Is the detection sensor of LW-PX900 clean?
If not, wipe the dirt o with a soft cloth.
MEMO
If none of the above has solved the problem or the symptom is
other than the above, contact the K-Sun customer support center.
Troubleshooting
Included Items
Specications
Li-ion battery specications
Ambient temperature
During operation 0 to 40 degrees C
Charge 0 to 40 degrees C
During storage Less than 1 month -20 to 50 degrees C
Less than 3 month -20 to 40 degrees C
Less than 1 year -20 to 20 degrees C
Charging information
Nominal
specications
Charging current (Std.) 1.0 A
Charging voltage (Std.) 8.05 V
Charging time Approx. 3 hours
Charge limits Battery pack model C52CE97010
Maximum charge
current, A
1.0 A
Maximum charge
voltage, V
8.4 V
1
2
3
4
5
6
7