Dynabrade Dynorbital-Spirit 59000 Safety, Operation And Maintenance

Download Safety, operation and maintenance of Dynabrade Dynorbital-Spirit 59000 Sander, Sanders for Free or View it Online on All-Guides.com. This version of Dynabrade Dynorbital-Spirit 59000 Manual compatible with such list of devices, as: Dynorbital-Spirit 59000, Dynorbital-Spirit 59009, Dynorbital-Spirit 59015, Dynorbital-Spirit 59026, Dynorbital-Spirit 59038

Brand: Dynabrade

Category: Sander , Sanders

Type: Safety, operation and maintenance

Model: Dynabrade Dynorbital-Spirit 59000 , Dynabrade Dynorbital-Spirit 59001 , Dynabrade Dynorbital-Spirit 59002 , Dynabrade Dynorbital-Spirit 59003 , Dynabrade Dynorbital-Spirit 59004 , Dynabrade Dynorbital-Spirit 59005 , Dynabrade Dynorbital-Spirit 59006 59007 , Dynabrade Dynorbital-Spirit 59008 , Dynabrade Dynorbital-Spirit 59009 , Dynabrade Dynorbital-Spirit 59010 , Dynabrade Dynorbital-Spirit 59011 , Dynabrade Dynorbital-Spirit 59012 , Dynabrade Dynorbital-Spirit 59013 59014 , Dynabrade Dynorbital-Spirit 59015 , Dynabrade Dynorbital-Spirit 59016 , Dynabrade Dynorbital-Spirit 59017 , Dynabrade Dynorbital-Spirit 59018 , Dynabrade Dynorbital-Spirit 59019 , Dynabrade Dynorbital-Spirit 59020 59059 , Dynabrade Dynorbital-Spirit 59022 , Dynabrade Dynorbital-Spirit 59023 , Dynabrade Dynorbital-Spirit 59024 , Dynabrade Dynorbital-Spirit 59025 , Dynabrade Dynorbital-Spirit 59026 , Dynabrade Dynorbital-Spirit 59027 59028 , Dynabrade Dynorbital-Spirit 59029 , Dynabrade Dynorbital-Spirit 59030 , Dynabrade Dynorbital-Spirit 59031 , Dynabrade Dynorbital-Spirit 59032 , Dynabrade Dynorbital-Spirit 59033 , Dynabrade Dynorbital-Spirit 59034 59035 , Dynabrade Dynorbital-Spirit 59036 , Dynabrade Dynorbital-Spirit 59037 , Dynabrade Dynorbital-Spirit 59038 , Dynabrade Dynorbital-Spirit 59039 , Dynabrade Dynorbital-Spirit 59040 , Dynabrade Dynorbital-Spirit 59041 59042 , Dynabrade Dynorbital-Spirit 59043 , Dynabrade Dynorbital-Spirit 59044 , Dynabrade Dynorbital-Spirit 59100 , Dynabrade Dynorbital-Spirit 59101 , Dynabrade Dynorbital-Spirit 59102 , Dynabrade Dynorbital-Spirit 59103 59104 , Dynabrade Dynorbital-Spirit 59105 , Dynabrade Dynorbital-Spirit 59106 , Dynabrade Dynorbital-Spirit 59107 , Dynabrade Dynorbital-Spirit 59108 , Dynabrade Dynorbital-Spirit 59109 , Dynabrade Dynorbital-Spirit 59110 59111 , Dynabrade Dynorbital-Spirit 59112 , Dynabrade Dynorbital-Spirit 59113 , Dynabrade Dynorbital-Spirit 59114

Pages: 12

Download Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance

Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 1
1
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 2
2
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 3
3
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 4
4
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 5
5
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 6
6
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 7
7
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 8
8
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 9
9
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 10
10
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 11
11
Dynabrade Dynorbital-Spirit 59000 Safety, operation and maintenance - Page 12
12
Maintenance Instructions
Important: A Preventative Maintenance Program is recommended whenever portable power tools are used.
Use only genuine Dynabrade replacement parts to insure quality. To order replacement parts, specify Model#, Serial# and RPM of your air tool.
All Dynabrade Rotary Vane air tools must be used with a Filter-Regulator-Lubricator to maintain all warranties. Dynabrade recommends the following:
11405 Air Filter-Regulator-Lubricator (FRL) – Provides accurate air pressure regulation and two stage filtration of water contaminants. Operates 40
SCFM/1,133 LPM @ 100 PSIG with 3/8" NPT female ports.
Dynabrade recommends one drop of air lube per minute for each 10 SCFM (example: if the tool specification states 40 SCFM, set the drip rate on the
filter-lubricator to 4 drops per minute). Dynabrade Air Lube (P/N 95842: 1 pt 473 ml) is recommended.
Routine Preventative Maintenance: Check free speed of Dynorbital-Spirit™ using a tachometer.
Mineral spirits are recommended when cleaning the tool and parts. Do not clean tool or parts with any solvents or oils containing acids, esters,
ketones, chlorinated hydrocarbons or nitro carbons.
DO NOT
clean or maintain tools with chemicals that have a low flash point (example: WD-40
®
).
A Drop-In Motor and Tune-Up Kit are available, see specific kit number on page 8.
Air tool stampings must be kept legible at all times, if not, reorder and replace. User is responsible for maintaining specification information i.e.:
Model #, S/N, and RPM.
Blow air supply hose out prior to initial use.
Visually inspect air hoses and fittings for frays, visible damage and signs of deterioration. Replace damaged or worn components.
Refer to Dynabrade's Warning/Safety Operating Instructions Tag (Reorder No. 95903) for safety information.
After maintenance is performed on tool, add a few drops of Dynabrade Air Lube (P/N 95842) to the air line and start the tool a few times to lubricate air motor.
Check for excessive tool vibration.
Handling and Storage:
Protect tool inlet from debris (See Notice Below).
DO
NOT carry tool by air hose.
Protect abrasive accessories from exposure to water, solvents, high humidity, freezing temperature and extreme temperature changes.
Store accessories in protective racks or compartments to prevent damage.
Notice
All Dynabrade motors use the highest quality parts and materials available and are machined to exacting tolerances. The failure of quality pneumatic motors
can most often be traced to an unclean air supply or the lack of lubrication. Air pressure easily forces dirt or water contained in the air supply into motor
bearings causing early failure. It often scores the cylinder walls and the rotor blades resulting in limited efficiency and power. Our warranty obligation is
contingent upon proper use of our tools and cannot apply to equipment which has been subjected to misuse such as unclean air, wet air or a lack of
lubrication during the use of this tool.
One Year Warranty
Following the reasonable assumption that any inherent defect which might
prevail in a product will become apparent to the user within one year from
the date of purchase, all equipment of our manufacture is warranted
against defects in workmanship and materials under normal use and
service. We shall repair or replace at our factory, any equipment or part
thereof which shall, within one year after delivery to the original purchaser,
indicate upon our examination to have been defective. Our obligation is
contingent upon proper use of Dynabrade tools in accordance with factory
recommendations, instructions and safety practices. It shall not apply to
equipment which has been subject to misuse, negligence, accident or
tampering in any way so as to affect its normal performance. Normally
wearable parts such as bearings, contact wheels, rotor blades, etc., are not
covered under this warranty.
3
1. American National Safety Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Reference Contact Information