Fisher & Paykel OB60Series Installation Instructions Manual

Download Installation instructions manual of Fisher & Paykel OB60 models Oven for Free or View it Online on All-Guides.com.

Fisher & Paykel OB60 models Installation instructions manual - Page 1
1
Fisher & Paykel OB60 models Installation instructions manual - Page 2
2
Fisher & Paykel OB60 models Installation instructions manual - Page 3
3
Fisher & Paykel OB60 models Installation instructions manual - Page 4
4
Fisher & Paykel OB60 models Installation instructions manual - Page 5
5
Fisher & Paykel OB60 models Installation instructions manual - Page 6
6
Fisher & Paykel OB60 models Installation instructions manual - Page 7
7
Fisher & Paykel OB60 models Installation instructions manual - Page 8
8
Important!
SAVE THESE INSTRUCTIONS
The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our
local website listed at the end of this document or contact your local Fisher & Paykel dealer.
SAFETY AND WARNINGS
1
WARNING!
Electrical shock hazard
Always disconnect the appliance from the mains power supply before
carrying out any maintenance or repairs.
Connection to a good earth wiring system is essential and mandatory.
Alterations to the domestic wiring system must only be made by a
qualified electrician.
Failure to follow this advice may result in electrical shock or death.
WARNING!
Fire hazard
Do not use adapters, reducers, or branching devices to connect this appliance to
the mains power supply.
Failure to follow this advice may result in overheating, burning, or fire.
Important safety instructions!
To avoid hazard, follow these instructions carefully before installing or using this appliance.
Please make this information available to the person installing the appliance - doing so could reduce
your installation costs.
This appliance must be installed and connected to the mains power supply only by a suitably qualified
person according to these installation instructions and in compliance with any applicable local
building and electricity regulations. Failure to install the appliance correctly could invalidate any
warranty or liability claims.
If the power supply cable is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
WARNING!
Cut hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.
Multifunction ovens
Installation instructions
OB60 models
NZ AU GB IE SG
(1,1) -1- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM
(1,1) -1- 599790F OB60&OB90 installA2 NZGB.indd 24/05/13 2:37 PM