Crestron CEN-NSP-1 Setup Manual

Download Setup manual of Crestron CEN-NSP-1 GPS, Media Player for Free or View it Online on All-Guides.com.

Crestron CEN-NSP-1 Setup manual - Page 1
1
Crestron CEN-NSP-1 Setup manual - Page 2
2
DO GUIDE
DO Check the Box
QUANTITY PRODUCT COLOR PART NUMBER
1 Mounting Bracket Assembly Black 4519035
2 Screw, 06-32, 3/8" L, Pan Phillips Black 2007225
CEN-NSP-1
Network Stream Player
DO Make Connections
Make the necessary connections to the device. Connect the power last.
NOTE: A power supply is not included. The device requires a PoE injector or PoE switch (sold separately).
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug to an earth ground
(building steel).
NOTE: To prevent overheating, do not operate this product in an area that exceeds the environmental
temperature range listed in the specications on the Crestron
®
website.
DO Program the Device
To use the CEN-NSP-1, it must be programmed in a SIMPL Windows or Crestron Studio™ program. All
VT Pro-e
®
projects in the system must contain device controls using traditional programming methods or a
Media Player object. For details, refer to the SIMPL Windows help le, the VT Pro-e help le, or the Media
Player Programming Guide, which can be found at
http://support.crestron.com/app/answers/detail/a_id/5316/kw/media%20player.
DO Enable and Disable Sources
The CEN-NSP-1 can receive audio from an iOS
®
device over a wired connection or an AirPlay
®
wireless
connection. It can also stream content from SiriusXM
®
Internet Radio.
NOTE: SiriusXM Internet Radio requires a subscription. Contact SiriusXM Radio Inc. for details.
1. On the touch screen or mobile device, tap
until the Main menu is displayed.
DO Connect an iOS Device
The CEN-NSP-1 can receive audio from an iOS device over a wired connection or an AirPlay wireless
connection.
NOTE: While the CEN-NSP-1 can connect with a wired device and AirPlay simultaneously, only one
connection method can be listened to at a time.
Set Up a Wired Connection
To use a wired connection between the CEN-NSP-1 and an iOS device, connect the charging cable that is
supplied with the iOS device to the iPod/iPhone port on the CEN-NSP-1 and the iOS device.
NOTE: Only iOS devices can be connected to the iPod/iPhone port. If a device is connected to the iPod/
iPhone port, it cannot be connected over AirPlay.
NOTE: Only one iOS device can be connected to the iPod/iPhone port at a time. Use of a hub to connect
multiple devices to the CEN-NSP-1 is not supported.
NOTE: An iPad
®
cannot be connected to the iPod/iPhone port.
Set Up an AirPlay Connection
Perform the following to use an AirPlay connection:
1. On the iOS device, open the Control Center
(swipe up from the bottom of the screen). The
selected AirPlay option is displayed.
2. Tap the selected AirPlay option to display
a list of devices that are compatible with
AirPlay.
3. Tap the hostname of the CEN-NSP-1. The
iOS device establishes a connection with the
CEN-NSP-1.
NOTE: Only one device can be connected via AirPlay at a time. If a second device is connected, the device
that was connected rst is disconnected.
NOTE: To use AirPlay, the CEN-NSP-1, wireless router, and iOS device must be connected to the same
subnet.
NOTE: Crestron recommends using the latest version of iOS.
2. Tap + to display the Setup Menu.
5. Tap Enable or Disable.
6. Repeat steps 4 and 5 for each source.
7. Tap until the Setup Menu is displayed.
8. Tap Exit Setup to return to the Main menu.
3. Tap Enable/Disable Sources to display the
Enable/Disable Sources screen. Sources
that are enabled are visible to the user and can
be controlled. Sources that are disabled are
hidden and cannot be controlled by the user.
4. Tap the source to be enabled or disabled.
To Audio Receiver
From iOS Device
To LAN/PoE
Ground
AirPlay Option