CO/Tech EMT707CTL-UK Instruction Manual
Download Instruction manual of CO/Tech EMT707CTL Switch for Free or View it Online on All-Guides.com.
Brand: CO/Tech
Category: Switch
Type: Instruction manual
Model: CO/Tech EMT707CTL , CO/Tech EMT707CTL-UK
Pages: 5
GREAT BRITAIN • CUSTOMER SERVICE tel. 0845 300 9799 e-mail [email protected] internet www.clasohlson.com/uk
360
MENY SET → +
RST
←
W
COST
I.68
TARIF
0.50
kWh
I234.56
W
3680
3680
VA
230.00
V
I6.00
A
50.00
Hz
0.99
PF
8888.8.8
V Hz
A VA
W PF
kWh
COST TARIFF
Ver. 20140214
Plug-In Electricity Meter
Art.no 18-2027 Model EMT707CTL-UK
36-2897 EMT707CTL
Please read theentire instruction manual before
use and save it for future reference. We reserve
theright for any errors in text or images and for
making any necessary technical changes to this
document. If you should have any questions
concerning technical problems please contact
our Customer Services.
Safety
• The product is intended only for use indoors.
• Devices connected to theelectricity meter
should be of thesame power rating and
specifications.
Product Description
The electricity meter measures how much ener-
gy anelectric device uses. Theelectricity meter
can calculate thetotal cost of running adevice
if theprice of each KWh is entered. Thedisplay
shows, amongst other things, thevoltage, po-
wer, energy consumption, kWh, and theresistive
load (VA) of theconnected device. This product
should be connected to anearthed socket.
Buttons
• [ MENU ] Press to view
cost, tariff, kWh, VA,
Volts, Amps, Hz and
power factor.
• [ SET ] Use to set
thetariff and kWh.
• [
←
→
] Use to change
settings.
• [ + ] Use to change
settings.
• [ RST ] Hold in this
button to reset theunit
to its factory settings.
Cost, tariff and kWh
are not reset.
Guide to the functions
Press the[ MENU ] button to view thefunctions
in thefollowing order:
1. COST
Shows thepresent
load.
Shows thetotal cost
(up to 9999.99).
2. TARIFF
Shows
theprogrammed tariff.
3. kWh
Shows thetotal
consumption in kWh.
4. W
Shows thepresent
consumption in Watts.
NB: Theminimum unit
of power that can be
measured is 5 W.
5. VA
Shows theactive +
reactive power.
6. V
Shows thevoltage of
thepower supply.
7. A
8. Hz
Shows thefrequency of
thepower supply.
9. PF
Shows thepower factor.
10. RESET
When theunit is reset,
all thesymbols will be
displayed for abrief
moment.
Setting the electricity meter
1. Connect theelectricity meter to anearthed
wall socket. Theelectricity meter will start
and for amoment all thesymbols will appear
on thedisplay.
2. After about 3 seconds theelectricity
meter will enter thecost mode (fig.1)
and thedisplay will show thelatest cost
calculation.
3. Press [ SET ] once. “TARIFF” will appear on
thedisplay and theright-hand digit will flash.
4. Press [
←
→
] to choose which digit you wish
to set.
5. Press [ + ] to set thevalue of thedigit that
flashes. Press [
←
→
] once again to choose
thenext digit you wish to set.
6. Press [ SET ] to show and set thevalue
themeasurement of kWh is to start at.
Thedefault setting is 0, but this can be
changed if you wish to set theelectricity
meter to thesame setting as anexisting
electricity meter.
7. Set thekWh as instructed above.
8. When you have set theelectricity meter, plug
in thedevice you wish to measure. Metering
begins at once.
Care and Maintenance
Always remove theelectricity meter from thewall
socket before cleaning it. Wipe with asoft, lightly
moistened cloth.
Disposal
Follow local ordinances when disposing of this
product. If you are unsure about how to dispose
of this product contact your municipality.
Specifications
Current 230 V AC, 50 Hz
Power 3680 W
Minimum power unit 5 W
Measuring Ranges 110–300 V
5–4800 VA (3600 W)
0.02–16 A
Operating Temperature −20 to 40 °C
Accuracy
V ≤ ± 5.0 %
A ≤ ± 5.0 %
Hz ≤ ± 0.2 %
W ≤ ± 5.0 %
VA ≤ ± 5.0 %
kWh ≤ ± 1.0 %