AudioSource AMP100VS Owner's Manual

Download Owner's manual of AudioSource AD1002 Amplifier for Free or View it Online on All-Guides.com.

AudioSource AD1002 Owner's manual - Page 1
1
AudioSource AD1002 Owner's manual - Page 2
2
AudioSource AD1002 Owner's manual - Page 3
3
AudioSource AD1002 Owner's manual - Page 4
4
OWNER’S MANUAL
AMP100VS
AudioSource®
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
www.audiosource.net
AMP100VS Owner’s Manual 70715
Congratulations on your purchase of the AudioSource® AMP100VS.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
Please read your warranty and retain your receipt and original carton
for possible future use.
For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net
AMP100VS
Stereo Power Amplifier
FEATURES:
MAIN / INTERRUPT priority input switching
MAIN auxiliary output
Speaker A/B switching
Front panel Balance and Volume controls
Signal sensing “Power On” and Trigger mode
SPECIFICATIONS
Stereo (8 ohm): 50W per channel, <0.2% THD+N
Stereo (4 ohm): 60W per channel, <0.2% THD+N
Bridged Mono (8 ohm): 150W, 1kHz, <1% THD+N
Frequency Response: 10Hz ~ 30kHz, +0dB/ -3dB
Signal to Noise Ratio: 100dB below 50W output into 8 ohms
Channel Separation: 70dB @ 1kHz, referred to 50W output
into 8 ohms
Input Sensitivity: 700mV input for rated 50W output
into 8 ohms
AC Power Consumption: 500W maximum
Net Weight: 9.6lbs / 4.4kgs
Gross Weight: 10.8lbs / 4.9kgs
2.9”
(74mm)
16.5” (419mm)
9.5”
(242mm)
Rear mounted treble and bass controls
Bass/Treble Control: +/- 12dB @ 100Hz and 10kHz
Left
Right
Balance
Volume
SPEAKERS
A B
AMP100VS
STEREO POWER AMPLIFIER
Min
Max
POWER