• Home
• Brands
• Analog way Manuals
• Analog way SMX200
• Analog Way smx200 Quick Start Manual

Analog Way smx200 Quick Start Manual

Download Quick start manual of Analog way SMX200 Amplifier, Matrix Switcher for Free or View it Online on All-Guides.com.

1

2

3

4

QUICK START GUIDE

What’s in the box

Quick install and setup

Thank you for choosing Analog Way and the Smart MatriX. By following these simple steps, you will be able to setup

and use your powerful 12x2 Scaled Matrix with Native Hi-Res. within minutes. Discover the Smart MatriX extensive

capabilities and intuitive interface while conguring your rst show, and unleash your creativity for a new experience in

show and event management by Analog Way.

Smart MatriX - SMX200

1 x Smart MatriX (SMX200)

1 x Power supply cord

2 x DVI male to HD15 female and DVI-D female breakout cable

1 x HD15 to 5 BNC cable

1 x Ethernet cross cable (for device update)

1 x Set of 11 audio 5 pin screw terminals

4 x Screws (M4x12mm)

1 x RCS - Remote Control Software CD-ROM (PC only) *

1 x Quick Start Guide (PDF version) *

1 x User Manual (PDF version) *

* Download on our website: www.analogway.com

Key points:

DSK function uses a layer

Frame and Logo are unscaled sources

One logo available in Native Matrix Mode per output

BLACK button allows to remove Layer (Clear function)

(use an external Analog Way Controller).

SMX200 can be used to display:

- Sources seamlessly switched in the Background Live

layer

- 1 PIP on Background Live + 1 Logo / per output

- 2 PIPs on Background Frame + 1 Logo / per output

- No preview

Getting Started:

You may wish to reset the unit to factory settings to get

started. Go to Menu -

>

Control -

>

Default Values -

>

Yes.

1. Select the Output #1 and #2 resolution that matches

the native resolution of your display. You will next be

prompted to choose enable follow mode if desired and

the output rate.

2. Inputs can be congured automatically using the

AutoSet All function.

Menu -

>

Inputs -

>

AutoSet All.

It will scan each input and detect the sync type that is

plugged in. You can still do an Autoset or Manual setup

per input.

The advanced Features of SMX200 are available by the

external remote control as:

- Orchestra – Ref. ORC50

- Axion2 – Ref. ARC200

- Remote Control Software – Ref. RCS (supplied)

- Triple Remote Control Keypad – Ref. TRK-800

- Remote Control Keypad – Ref. RK-300.

The Smart Matrix has 4 layers available called:

[BACKGROUND FRAME], [BACKGROUND LIVE/PIP1],

[PIP2] and [LOGO1].

Each output can display the following Layers Hierarchy.

IMPORTANT: simply selecting a menu item will not

set it to that value. Be sure to press the ENTER

button when parametering the menu items.

WARNING !

If required, front handles of the device can be dismantled,

but with caution.

The original screws removed must not be reintroduced to

their location without handles in place.

Substantial damages can occur, including risk of elec-

tric shock from the mains voltage.

Only M4x12mm screws can be used.

(They are supplied with the unit)

Logo1

Live PIP 2

Live Background/PIP 1

Background Frame