Durabrand T6609BK Quick Setup Manual

Download Quick setup manual of Durabrand T6609BK TV, TV Accessories for Free or View it Online on All-Guides.com.

Brand: Durabrand

Category: TV , TV Accessories

Type: Quick setup manual for Durabrand T6609BK

Pages: 2

Download Durabrand T6609BK Quick setup manual

Durabrand T6609BK Quick setup manual - Page 1
1
Durabrand T6609BK Quick setup manual - Page 2
2
QUICK SETUP GUIDE
for T6609BK
1EMN20245
T6609BK
Congratulations on your purchase of a DURABRAND TV-Video Combi. This Quick Setup Guide takes
you through the first-time setup with simple instructions so you can enjoy exceptional audio and video
quality as soon as possible. Please refer to the Owner's manual for detailed instructions. If you have read
your instructions and still need assistance, call ASDA helpline at 0845-300-7775.
Unless stated, all procedures described use the remote control.
Connection
Connecting the TV-Video Combi
Note: If the little red STANDBY indicator on the front panel does not light on, power on the unit with the
main power switch. The main power switch is located on the left side panel.
Connecting Additional Devices
Connect other devices such as a decoder, satellite receiver, camcorder, etc.
Loading Batteries in the Remote Control
Install two R6 batteries matching the polarity indicated inside the battery compartment.
Caution
Do not mix old and new batteries. (Also never mix alkaline batteries with manganese batteries.)
Setting the Clock
Set the 24-hour clock.
Note:
Although seconds are not displayed, they begin counting from 00 when you exit by pressing .
Use this feature to synchronize the clock with the correct time.
If the unit is unplugged or if there is a power failure for more than 1 minute, you may have to reset the
clock.
Channel Setting (Automatic Channel Preset)
DO NOT use this feature if you intend to use some of the pre-tuned channels. Use the “Manual” channel
presetting function to tune in the additional channels you require. Refer to the User’s Manual for more
information.
Note: After you have connected additional devices (satellite receiver, etc.) through the aerial cable,
power them on. The automatic channel search will recognize them and save them.
WARNING! Never make or change connections with the power switched on.
1. Insert the anntena cable plug into the
AERIAL socket.
2. Plug the unit into an AC outlet.
Connecting to the EXT1/AV1 scart socket Connecting to the front AUDIO/VIDEO
input sockets.
EXT 1/AV1
VHF/UHF
MIXER
UHF
VHF
coaxial cable
(not supplid)
EXT 1/AV1
scart cable (not supplid)
y
STANDBY-ON
-
VOL
+
-
PROG
+
C A E B D I
HEADPHONE
VIDEO AUDIO
Audio/Video cable
1. Press “MENU”. 2. Select “INITIAL”.
3. Select “CLOCK”. 4. Select “YEAR” and then select the relevant
year.
5. Select the month, day, hour and minute
in the same way.
6. Press to exit.
1. Press “MENU”. 2. Select “INITIAL”.
3. Select “CH TUNING”. 4. Select “AUTO”.
MENU
MENU
TIMER
SET UP
PICTURE
INITIAL
MENU
TIMER
SET UP
PICTURE
INITIAL
PLAY
STOP
Press or .
Press .
INITIAL
CH TUNING
CLOCK
PLAY
STOP
Press or .
Press .
CLOCK
YEAR 2 0 0 4
MONTH
_ _
DAY
_ _
_ _
HOUR
_ _
MINUTE
_ _
PLAY
STOP
Press or .
Press .
MENU
MENU
02
03
04
MENU
MENU
TIMER
SET UP
PICTURE
INITIAL
MENU
TIMER
SET UP
PICTURE
INITIAL
PLAY
STOP
Press or .
Press .
INITIAL
CH TUNING
CLOCK
PLAY
STOP
Press or .
Press .
AUTO
START FINISH
CH TUNING
AUTO
MANUAL
MOVE
PLAY
STOP
Press or .
Press .
new_guide.fm Page 1 Thursday, February 10, 2005 1:44 PM