HP PL4260N Service Manual
Download Service manual of HP PL4260N - 42" Plasma TV Flat Panel TV, HDTV for Free or View it Online on All-Guides.com.
Brand: HP
Category: Flat Panel TV , HDTV , LCD TV , Plasma TV , TV , TV Receiver
Type: Service manual
Model: HP PL4260N - 42" Plasma TV , HP PL5060N
Pages: 245
10 HP High-Definition Plasma TV Service Manual PL4260N, PL5060N
Factory Preset Display Modes
Preset
Pixel
format
Horizontal
frequency
(kHz)
Horizontal
polarity
Vertical
frequency
(Hz)
Vertical
polarity
Pixel Clk
(MHz) Source
1 640 x 480 31.469 – 59.940 – 25.175 VGA
2 640 x 480 37.500 – 75.000 – 31.500 VESA
3 720 x 400 31.469 – 70.087 + 28.322 VGA
4 800 x 600 37.879 + 60.317 + 40.000 VESA
5 800 x 600 46.875 + 75.000 + 49.500 VESA
6 1024 x 768 48.363 – 60.004 – 65.000 VESA
7 1024 x 768 56.476 – 70.069 – 75.000 VESA
8 1024 x 768 60.023 – 75.029 – 78.750 VESA
9 1280 x 768 47.396 + 59.995 – 68.250 VESA
10 1280 x 1024 63.981 + 60.020 + 108.000 VESA
11 1360 x 768 47.712 + 60.015 + 85.500 VESA
NOTE:
Timing 11 is supported by the PL5060N model only.
Controlling the Onscreen Display
The onscreen display (OSD) is controlled by using the remote control or the bezel buttons on the left side of the TV.
The TV indicators (A and B) are located on the front of the TV. The TV controls are located on the left side of the TV.
TV Indicators and Controls
MENU Menu displays the onscreen display (OSD) or closes the OSD menu.
OK OK starts the Auto Sync function for a connected PC signal. In an OSD menu,
selects the highlighted item in the OSD.
+VOL
–VOL
Volume (VOL) raises or lowers the sound level. In an OSD menu, press these
buttons to move right or left in the menu or to adjust an item.
+CH
–CH
Channel (CH) selects the next or previous channel. In an OSD menu, press these
buttons to move up or down in the menu.
SRC Source (SRC) selects the input Menu. In an OSD menu, this functions as a back
button or moves you up one item or menu level.
A Power button (A) turns on the TV or places it in standby mode.
B Remote control sensor (B) receives the signal from the remote control.