Winterhalter UC-S Operating Instructions Manual
Download Operating instructions manual of Winterhalter UC series Dishwasher, Industrial Equipment for Free or View it Online on All-Guides.com. This version of Winterhalter UC series Manual compatible with such list of devices, as: UC series, UC-L, UC-M, UC-S, UC-XL
Brand: Winterhalter
Category: Dishwasher , Industrial Equipment
Type: Operating instructions manual
Model: Winterhalter UC series , Winterhalter UC-L , Winterhalter UC-M , Winterhalter UC-S , Winterhalter UC-XL
Pages: 48
Download Winterhalter UC series Operating instructions manual
Operation
13
9 Operation
9.1 Switching on
9.1.1 Before switching on the machine
¾ Open the on-site water stop cock.
¾ Switch on the on-site mains disconnector.
¾ For your own safety, test the on-site residual-current circuit breaker (RCCB) by pressing the test button.
¾ Open the machine door and check whether the wash fields (top and bottom) and the filters (strainer, filter
cylinder) are installed.
¾ Close the machine door.
Warning
When using chemicals, adhere to the safety notes and recommended dosages printed on the
packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Do not mix different detergent products.
¾ Check whether there is detergent and rinse aid in the storage tanks (integrated in the machine or exter-
nal). Top them up in time or replace the storage tanks so that the cleaning result will not be negatively af-
fected.
9.1.2 Switching the machine on and preparing it so that it is ready for operation
This is where you learn how to prepare switch on and prepare the machine so that it is ready for operation.
You can select to program the machine to switch on automatically at a certain time (X 15.3) and be ready for
operation approximately 15 - 25 minutes later (depending on the water inlet temperature).
Screen 01
Screen 02
¾ Touch the screen with your
finger.
D Screen 01 appears.
¾ Press and hold the on button
(1) for approx. 2 seconds.
D Screen 02 appears with the
welcome message.
The welcome message disappears
automatically after a short time.
D The machine's tank is auto-
matically filled and heated at
the same time.
D Detergent is dosed into the
machine's tank (assuming a
dosing device is connected).
D The machine is ready as
soon as the rated tempera-
tures have been reached.
D The start button lights up
green and the washing pro-
grammes are displayed
1
.
1
The display of washing programmes depends on the purpose for which the machine has been programmed.
You will find an overview of the possible displays on pages 14 and 15.