HARDWIRE
WIRELESS
LIBRA-P432EX Series
CONTROL PANEL/COMMUNICATOR
Programming the LIBRA LIB-P432EX, LIB-P432EXT, LIB-P432EXT-230 control panels with the
GEM-DXRP2, GEM-DXRP3, GEM-DXK2, GEM-DXK3 and GEM-DXK4RF Series Keypads
WI1771 9/08
© NAPCO 2008
Quick Start (for GEM-DXK2):
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM Out-
put, Remote Bus, Earth Ground, Zone and Telephone Wiring. NOTE:
See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 55).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 w
Press NO ("X" or q) until "TURNON PROG Y/N" appears on the keypad.
Press YES ("r" or p) to enter Dealer Program Mode. See page 5.
Quick Start (for GEM-DXK3):
1. Refer to the wiring diagram, connect Siren, Aux. Power, PGM Out-
put, Remote Bus, Earth Ground, Zone and Telephone Wiring. NOTE:
See Installation Instructions (WI1691).
2. Connect AC power first and then the battery.
3. Configure the keypad (see page 55).
4. Access the Easy Menu Driven (Dealer Program) Mode:
Press
456789 w
Press NO ("X" or q) until "17" appears on the keypad.
Press YES ("r" or p) to enter Dealer Program Mode. See page 5.
PROGRAMMING
INSTRUCTIONS
R
Publicly traded on NASDAQ Symbol: NSSC
GEM-DXK2
Dealer Code
Dealer Code
GEM-DXK3
32
DXK4RF-319 Keypad
DXK4RF-433 Keypad
™