• Home
• Brands
• Maytag Manuals
• Maytag AMC4080AAB/W/Q/S
• Maytag UMC1071AAB/W Service Manual

Maytag UMC1071AAB/W Service Manual

Download Service manual of Maytag AMC4080AAB/W/Q/S Microwave Oven for Free or View it Online on All-Guides.com. This version of Maytag AMC4080AAB/W/Q/S Manual compatible with such list of devices, as: AMC4080AAB/W/Q/S, AMC5101AAB/W/Q/S, AMC5143AAB/W/Q/S, MMC5080AAB/W/Q/S, UMC1071AAB/W

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

49

50

51

52

53

Disassembly Procedures

To avoid the risk of electrical shock, personal injury or

death; disconnect power to oven and discharge

capacitors before following any disassembly procedure.

©2004 Maytag Services 16022923 Rev. 0 19

WARNING

!

High voltage is present at the high voltage terminal of the

high voltage transformer during any cooking cycle.

It is neither necessary or advisable to attempt

measurement of the high voltage.

Before touching any oven components or wiring, always

unplug the oven from its power source and discharge

capacitor.

Door Assembly

CAUTION!

A microwave leakage test must be performed anytime

a door assembly is removed, replaced, disassembled,

or adjusted for any reason.

Door Removal

1. Disconnect power to oven and remove outer case,

see "Outer Case" procedure.

2. Open the oven door to gain access to the upper

hinges. Remove 2 screws securing the upper

hinges.

3. Guide the upper hinge out of the hinge cavity.

4. Gently maneuver the door hinge pin away from the

lower hinge assembly. Lower hinge bracket should

remain attached to the microwave.

NOTE: When aligning the door for assembly, fully open

the door.

5. To place the door back on the unit, gently maneuver

the lower hinge pin onto the lower hinge assembly

while guiding the upper hinge assembly into the

upper hinge assembly cavity. Use caution and do not

allow the upper hinge assembly to separate from the

upper hinge pin. Reattach the two upper hinge

assembly retaining screws.

Upper Hin

g

e

and screws

Lower Hinge

Door Disassembly

1. Disconnect power to oven and remove oven door,

see "Door Removal" procedure.

2. To remove the choke cover, locate one of the plastic

seatings securing the choke cover to the inner door

assembly. Insert a tool near the seating and gently

pry outward. Continue to work around the door

casing (prying near the plastic seatings) until choke

cover is completely loose. Remove the choke cover.

CAUTION!

To avoid property damage, care must be taken when

prying choke cover from inner door assembly and

when prying inner door assembly from door frame.

3. Once the choke cover is removed, remove the inner

door assembly.

4. To remove the inner door assembly, carefully pry on

the seatings securing the inner door assembly to the

door frame. Continue to work around the door casing

(prying near the plastic seatings) until the inner door

assembly is completely loose. Remove the inner

door assembly.

5. Once the inner door assembly is removed, the door

latch and spring assembly may be removed.

6. When removing door latch and spring assembly,

remove the spring first, then slide latch assembly up

and remove.

7. Reassemble in reverse order.