Aeotec DSC18103-ZWEU Instruction Manual

Download Instruction manual of Aeotec DSC18103-ZWEU Switch for Free or View it Online on All-Guides.com.

Brand: Aeotec

Category: Switch

Type: Instruction manual for Aeotec DSC18103-ZWEU

Pages: 6

Download Aeotec DSC18103-ZWEU Instruction manual

Aeotec DSC18103-ZWEU Instruction manual - Page 1
1
Aeotec DSC18103-ZWEU Instruction manual - Page 2
2
Aeotec DSC18103-ZWEU Instruction manual - Page 3
3
Aeotec DSC18103-ZWEU Instruction manual - Page 4
4
Aeotec DSC18103-ZWEU Instruction manual - Page 5
5
Aeotec DSC18103-ZWEU Instruction manual - Page 6
6
English
GREAT BRITAIN • customer service
tel: 0845 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
Ver. 20140722
In-Wall Smart Energy Switch Receiver
Art.no 36-5744 Model DSC18103-ZWEU
Please read theentire instruction manual before using theproduct and then save it for future
reference. We reserve theright for any errors in text or images and any necessary changes
made to technicaldata. In theevent of technical problems or other queries, please contact our
CustomerServices.
Things to consider:
Other wireless equipment using thesame frequency band can reduce thetransmissionrange.
Therange of all wireless equipment depends on thetype of obstacles located between
thetransmitter and thereceiver (e.g. aconcrete wall will interfere with thesignal more than
aplasterboard wall).
If you experience problems, try thefollowing:
Turn off any other existing wireless equipment to check whether this is thecause of
theproblem.
Reposition thewireless equipment, shorten thedistance between thetransmitter and
thereceiver or reduce thenumber of obstacles (walls, furniture,etc.) betweenthem.
Product description
Remote control switch for flush-mounting behind in-wall appliance switches. Workswith
Zipabox Duo and other Z-wave-system products, regardless ofmake.
Supports 2-way communications, enabling it to report thestatus of theremote controlled
device so you can see whether or not it ison.
Measures theenergy consumption of theconnected device and reports this information back
to theZ-wave controlunit.
Controlled by smartphone or tablet via agateway like theZipabox Duo or directly via
aseparate remote control (sold separately).
Also equipped with abuilt-in repeater function which allows other remote receivers to more
readily receive signals by repeating thesignals it receives from thegateway or remote control.
Installation
Note: Thisswitch is designed to be hard-wired behind awall switch. Ifyou are at all unsure about
any aspect of theinstallation, let aqualified electrician undertake thework.
1. Set your Z-wave control device to learningmode.
2. Push thebutton on thefront of thereceiver to connect it to your existing Z-wave network.
Note: TheLED indicator on thereceiver will either shine steadily or be off (depending on
whether theconnected switch is off or on) if thereceiver is connected to your existing Z-wave
network. TheLED indicator will flash slowly if thereceiver is not connected to your existing
Z-wave network.
3. You can also use theconnected switch, instead of pressing thebutton on thefront of
thereceiver, to connect thereceiver to your existing Z-wave network.
4. You can switch thereceiver on and off using thebutton on thefront when it is connected to
your existing Z-wave network.
5. Thereceiver is factory preset to work with a2-pole toggle switch. Holdthebutton on thefront
of thereceiver in for 6 seconds to setup thereceiver to work with apush-button switch.
Uninstallation
Set your Z-wave control device to thedevice-removalmode.
Uninstall thereceiver by switching theconnected switch on and off 10 times in quick succession
or pressing thebutton on thereceiver.
Thereset feature
Hold in thebutton on thereceiver for 20 seconds.
For more information please visitwww.aeotec.com for acomplete instruction manual.
Disposal
This product should be disposed of in accordance with local regulations.
Ifyou are unsure how to proceed, contact your local council.
Specifications
Rated voltage 230 V, 50 Hz
Load capacity 2300W/10A. Max 350 W inductive load.
Frequency 868.42 MHz