Compaq 207590-B21 - Power Distribution Unit Strip Important Safety Instructions

Download Quick installation instructions of Compaq 207590-B21 - Power Distribution Unit Strip Other, Power Supply for Free or View it Online on All-Guides.com.

Compaq 207590-B21 - Power Distribution Unit Strip Quick installation instructions - Page 1
1
Compaq 207590-B21 - Power Distribution Unit Strip Quick installation instructions - Page 2
2
About This Device
Kit Contents
1. Dual Input Power Distribution Unit
2. Additional cables - IEC-320 jumper cables (2)
3. Assembly, 0U/1U mounting hardware
Mounting brackets - 0U (2)
Mounting brackets - 1U (2)
Rail assembly for rack mounting (assembly required) - 1U
Rail, front 1U (2)
Rail, rear 1U (2)
Nut, wing (4)
Nut, metric hex (4) [recommended when shipping in a rack.]
Cage nuts - (4) [2 extra]
Screws mounting brackets to unit (6) [2 extra]
Screws mounting rails/brackets to rack (10) [2 extra]
Screws mounting unit (0U) to rack (6) [2 extra]
4. Tie wraps (15) [several extra]
This guide serves as an outline to assist qualified personnel with the installation
of the Compaq Dual Input Power Distribution Unit (PDU).
The input voltage for this model Dual Input PDU is 200VAC to 240VAC.
This Dual Input PDU includes the following features:
Mounts in either 0U or 1U configuration, offering maximum flexibility for
utilizing rack space
Provides 12 receptacles on 4 circuit breakers for rack-mounted devices
Protects against electrical line surges and spikes
This Dual Input PDU is used with information technology equipment.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS - This Quick Installation Guide contains
important instructions for the rack-mounted Dual Input PDU that should be
followed during installation.
Use screws (two on each side) to attach brackets to sides of unit. Secure unit
to side of rack by using screws (two on each side) to attach unit. Refer to the
1U configuration for installation of the cage nuts to secure screws to rails.
Installing the Unit - 0U Configuration
1
3
1
1
1
3
3
WARNING: There is a risk of personal injury from electrical shock and
hazardous energy levels. The installation of options and routine
maintenance and service of this product must be performed by
individuals who are knowledgeable about the procedures, precautions,
and hazards associated with AC power products.
Regulatory Compliance Information
All regulatory certifications for this product were obtained under the agency
series numbers EO3020 for the North American model and EO3020i for the
International model.
Please refer to the Important Safety Information (guide included with the Dual
Input PDU kit) before installing this product.
Important Safety Information
Read Before Installing Product
NOTICE
The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN,
NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. THIS
INFORMATION IS PROVIDED “AS IS” AND COMPAQ COMPUTER
CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR
STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE
AND AGAINST INFRINGEMENT.
This publication contains information protected by copyright. No part of
this publication may be photocopied or reproduced in any form without
prior written consent from Compaq Computer Corporation.
© 2000 Compaq Computer Corporation
Printed in the U.S.A.
Compaq, Registered U.S. Patent and Trademark Office.
DUAL INPUT POWER DISTRIBUTION UNIT KIT
QUICK INSTALLATION GUIDE
Second Edition (January 2001)
Part Number 192066-022
Compaq Computer Corporation
DUAL INPUT POWER
DISTRIBUTION UNIT KIT
Printed on recycled paper
Read Guide Completely Before
Beginning Installation Procedures
Quick Installation Instructions for
Rack-Mounted Dual Input Power Distribution Unit
192066- 022