Philips HADCO WAMT14 Installation Instructions

Download Installation instructions of Philips HADCO WAMT14 Flood Light for Free or View it Online on All-Guides.com.

Brand: Philips

Category: Flood Light

Type: Installation instructions for Philips HADCO WAMT14

Pages: 2

Download Philips HADCO WAMT14 Installation instructions

Philips HADCO WAMT14 Installation instructions - Page 1
1
Philips HADCO WAMT14 Installation instructions - Page 2
2
®
LISTED
ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW TO COOL BEFORE
PERFORMING ANY MAINTENANCE, INCLUDING RELAMPING AND CLEANING!
FOR USE ONLY WITH LINE VOLTAGE LANDSCAPE LIGHTING POWER UNITS THAT ARE RATED
MAXIMUM 120 VOLTS PER CIRCUIT.
! SAFETY WARNING:
This fixture can become very HOT! The fixture housing and lens, especially if it is glass, can become hot enough
to blister hands. Attention should be paid to where the fixture is mounted, particularly if it can be touched by
children or pets. To help prevent premature failure, decreased performance, overheating and risk of fire, keep
fixture and lens clean and free of leaves, mulch, debris and mineral deposits from water. The fixture and lens
can be cleaned using a soft cloth and a solution of mild liquid soap and warm water. Wipe clean and dry with a
soft, lint-free dry cloth. Avoid polishing fixture or lens.
Do not install fixture within 10 feet (3.05 meters) of a pool, spa or fountain.
SHROUD
HOUSING
1/2" N.P.S. FITTER
SHROUD SCREW
35W GY6.35 T-4 Bi-pin
The following lamps may
be used in this fixture:
50W GY6.35 T-4 Bi-pin
32001330, revision B
100 Craftway, P.O. Box 128
Littlestown, Pennsylvania 17340-0128
Phone: 800-331-4185 Fax: 717-359-9672
INSTALLATION INSTRUCTIONS:
WAMT14 FLOODLIGHT
This fixture is intended for installation in accordance with the National Electrical Code and local code
specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage
to the ballast and void the warranty. These instructions do not purport to cover all details or variations in
equipment, nor to provide for every possible contingency related to installation, operation, maintenance,
or mounting situation. Should specific problems occur that are not addressed by these instructions, contact
your Sales Representative or distributor for assistance. Retain these instructions for future reference.
page 1 of 2