Compaq 234664-002 - ProLiant - ML330T02 Setup And Installation Manual
Download Setup and installation manual of Compaq 234664-002 - ProLiant - ML330T02 Desktop for Free or View it Online on All-Guides.com.
Brand: Compaq
Category: Desktop
Type: Setup and installation manual for Compaq 234664-002 - ProLiant - ML330T02
Pages: 160 (4.2 Mb)
Download Compaq 234664-002 - ProLiant - ML330T02 Setup and installation manual
Hardware Options Installation 3-5
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML330 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 234833-001 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 5/23/01 3:48 PM
Removing Bezel Blanks
When installing a device into a removable media bay, it is sometimes
necessary to remove the corresponding bezel blank from the front bezel. To
remove a bezel blank:
CAUTION: To prevent damage to equipment or loss of information, make sure
that the server is powered down, all cables are disconnected from the back of
the server, and the power cord is disconnected from the grounded (earthed) AC
outlet before removing the front bezel.
NOTE: It is not necessary to remove a bezel blank when installing a hard drive into a
removable media bay.
1. Follow the procedures in “Powering Down the Server” and “Removing
the Front Bezel,” earlier in this chapter.
2. On the back of the front bezel, pinch the tabs on each end of the bezel
blank toward each other
, and then push the bezel blank through the
front bezel
.
1
2
Figure 3-3. Removing a bezel blank
To replace a bezel blank, reverse steps 1 and 2.