JBL GTR-7535 Owner's Manual
Download Owner's manual of JBL GTR-1001 Amplifier, Car Amplifier for Free or View it Online on All-Guides.com. This version of JBL GTR-1001 Manual compatible with such list of devices, as: GTR-1001, GTR-102, GTR-104, GTR-601, GTR-7535
Brand: JBL
Category: Amplifier , Car Amplifier
Type: Owner's manual
Model: JBL GTR-1001 , JBL GTR-102 , JBL GTR-104 , JBL GTR-601 , JBL GTR-7535
Pages: 14
1
2
3
4
5
6
7
8
9
10
11
12
13
14
GTR AMPLIFIERS
4. Remote (GTR-601, GTR-1001, GTR-7535):
Connect an 18awg wire from the “Remote Out” lead of the source unit to the REM input. This lead detects signal and instructs the amplifier to turn on.
(See 12. REM below for remote connection info for the GTR-102 and GTR-104 models.)
GTR REM input power block
5. Front and rear inputs and outputs (RCA):
• If your source unit offers preamp outputs, connect to the FRONT, REAR, and/or SUB inputs using RCA patch cables.
• To connect a second amp directly to the amplifier, run a patch cable from the PRE OUT outputs to the second amp’s preamp inputs. (Available on
GTR-102 and GTR-104 amplifiers only.)
6. Input level:
Select LO if providing signal to the amp using line-level connections. Select HI1 or HI2 if using speaker-level connections.
7. Crossover-filter selectors (GTR-102, GTR-104, GTR-7535)
Slider switches for selecting high-pass (HP), low-pass (LP), or FULL. GTR-601 and GTR-1001 filters are low pass only.
(See Setting the Crossover in Chapter 4.)
8. Gain:
Use input level controls to match the amp’s input sensitivity to the output level of your source unit. (See Setting the input levels in Chapter 4 for a
recommended adjustment procedure.)
9. Crossover Frequency Controls:
Use crossover-filter frequency controls for adjusting crossover point settings for full-range speakers and subwoofers.
(See Setting the Crossover in Chapter 4.)
10. ADAS Assign (GTR-102, GTR-104, GTR-7535):
When you connect your ADAS system to your GTR amp (cable sold separately), the amp will broadcast your vehicle’s driver assistance messages, such as
lane-departure warnings. By turning the ADAS Assign dial you can select the speaker the messages will be broadcast over. You can choose to hear messages
over your front left or FL (driver’s side), front right or FR (passenger side), rear left, or rear right speaker. Your music will mute when a warning or message is
broadcast, then resume when they’re finished.
11. Controller (GTR-102, GTR-104, GTR-7535):
Connect the supplied remote control panel to the amplifier’s Telephony connector, as shown in the illustration below. The remote control panel includes a long
cable and a mounting flange, allowing it to be mounted in a convenient location in the vehicle’s cabin.
+12V
REM
GND
FRONT
INPUT LEVEL
LO
FRONT
X-OVER
REAR
X-OVER
HI1 HI2
REARPRE OUT
R
L
LPF FULL HPF
LPF FULL HPF
GAIN
FREQ
ADAS ASSIGN
MIN
• • • •
MINMAX MAX
REAR FRONT
CONTROLLER REM
ADAS
UPGRADE
INPUT
REAR
80Hz 80Hz
•
•
• •
•
•
32Hz
32Hz320Hz 320Hz
FRONT
FL FR
RL
RR
IN
OUT
•
• •
•
5