Hotpoint TM VPL JW0 Operating Instrucctions
Download Operating instrucctions of Hotpoint TM VMT JX0 Kettle for Free or View it Online on All-Guides.com.
Brand: Hotpoint
Category: Kettle
Type: Operating instrucctions
Model: Hotpoint TM VMT JX0 , Hotpoint TM VPL JR0 , Hotpoint TM VPL JW0
Pages: 7
1
2
3
4
5
6
7
Indesit Company SpA
Viale Aristide Merloni, 47
60044 Fabriano (AN), Italy
www.indesitcompany.com
ENTR Operating instructionsKullanma talimatları 105
TM VPL JW0
TM VMT JX0
TM VPL JR0
9
X2
7
8
2
3
4
10
5
6
1
hotpoint.eu
13
en
lowed to get lime dissolved and then the boiler is
emptied. Please remember to rinse the unit fresh
water.
After boiling a certain amount of water the switch
is turned off, commercially decalcies or some
vinegar are added to water and some time is al-
TROUBLESHOOTİNG
Problems
It does not
boil water.
It boils
It delays
heating
water.
On-off
switch does
not work.
Possible Causes
• Boiler, boiling switch,
on-off switch or
energy transmitting
contacts may have
failed.
• Boiling switch and
on-off switch are not
in “on” position.
• Because of little
water, safety
thermostat has
operated to prevent
the unit from starting.
• Lid or teapot is not
on the kettle
• Boiling switch has
failed.
• Excess lime on the
kettle base
• Boiling switch is not
in boiling position
• Excess lime on the
kettle base
Solutions
• Contact technical service.
• Take the boiling switch and on-off switch to
“on” position.
• Wait until the unit to cool down or add cold
water.
• Close the lid of boiler or place the teapot on
the kettle.
• Contact technical service.
• Clean the lime in the equipment as described
in the user’s manual.
• When on-off switch is in “on” position, take
the boiling switch to boiling position.
• Clean the lime in the equipment as described
in the user’s manual.