Teltonika FM1110 User Manual
Download Operation & user’s manual of Teltonika FM1110 GPS, Gps tracker for Free or View it Online on All-Guides.com.
Brand: Teltonika
Category: GPS , Gps tracker
Type: Operation & user’s manual
Model: Teltonika FM1110 , Teltonika FM1120
Pages: 76
30
Note: A mobile phone will not understand and SMS with binary code, so sending
it to a mobile phone is useless. When sending a binary SMS to a phone number,
which is a server phone number, the server can interpret and understand binary
code, so the data can be read and you can view it on the server.
SMS login and password and authorized number list are used to protect FM1110
module from unauthorized access. Module accepts messages only from a list of
authorized numbers and with proper module login and password. Numbers must
be without “+” or “00” prefix. If no authorized numbers are entered, module
accepts messages from all numbers.
5.12 GSM settings, Operator list
Operators list – FM1110 can work in different modes (use different settings) according to
the operator list defined. Operator list is used for Data Acquisition Mode switching (see chapter
5.13 Data Acquisition Mode settings for more details). Modes are changed based on GSM
operator FM1110 is connected to.
Figure 23 Operator list configuration
If operator list is left empty, it will allow using GPRS to any GSM operator. Please note that
FM1110 will work in Unknown mode only (make sure it is configured to allow data sending –
GPRS context is enabled).
5.13 Data Acquisition Mode settings
Data Acquisition Modes are an essential part of FM1110 device, it is also highly
configurable.
By configuration user defines how records will be saved and sent. There are three different
modes: Home, Roaming and Unknown. All these modes with configured data acquisition and
send frequencies depend on current GSM Operator defined in Operator list (see section 5.12)
and are switched when GSM operator changes (e.g. vehicle passes through country boarder).
If current GSM operator is defined as Home Operator, device will work in Home Data
Acquisition mode, if current operator is defined as Roaming Operator, device will work in
Roaming Data Acquisition mode, and if current operator code is not written in Operator list (but