AMT Legend Amps M-1 User Manual

Download Operation & user’s manual of AMT Legend Amps B-1 Amplifier for Free or View it Online on All-Guides.com.

AMT Legend Amps B-1 Operation & user’s manual - Page 1
1
AMT Legend Amps B-1 Operation & user’s manual - Page 2
2
AMT Legend Amps B-1 Operation & user’s manual - Page 3
3
AMT Legend Amps B-1 Operation & user’s manual - Page 4
4
www.amtelectronics.com www.amtelectronics.com
1 1
Safety precautions.
CAUTION! There are no user serviceable parts inside. Repair of the device
can be carried out only by qualified experts. If the device is not used it must be
disconnected from mains.
WARNING! In order to avoid fire or electric shock the device must not be
exposed to rain or moisture. Do not let water or other liquid get inside the device.
Do not place vessels such as vases filled with liquid on top of the device.
This symbol indicates important information related to the
device maintenance and servicing contained in the
accompanying documentation.
Please read the instruction manual very carefully.
1. Keep the user's guide at hand.
2. Pay attention to warnings.
3. Follow all instructions related to device operation.
4. To clean the device, use only a dry cloth having
disconnected the device from mains prior to that.
5. Do not place the device near heat sources, keep it from
direct sunlight.
6. Lay the mains cable so that it is not stepped on and avoid its
contact with sharp corners, etc. If you use the plug or outlet
for switching the device off they should be easily accessible.
7. Use only additional devices and accessories recommended
by the manufacturer.
8. Disconnect the device from mains in case of thunder-storm
or when the device is not in use for prolonged time.
9. All works related to the device repair must be done only by
qualified service personnel.
10. WARNING! All service instructions are intended only for
qualified personnel in order to avoid electric shock; do not
carry out any repair works which are not described in the
instruction manual. Repair works must be carried out only by
qualified experts
.
Contents
Important instructions 1
Complete set 1
Introduction 2
Before you start 2
Specifications 2
Controls 3
Top panel 3
Right panel 3
Only for qualified service personnel 3
Batteries installation 3
Audio connections and switching 3
Audio connections (1-channel preamp) 3
Audio connections (2-channel preamp) 3
Audio connections (4-channel preamp) 4
Block diagram 4
IMPORTANTINSTRUCTIONS!
NON-OBSERVANCE OF THE FOLLOWING INSTRUCTIONS CAN CAUSE
DAMAGE OF THE AMPLIFIER OR SPEAKERS. THE DAMAGES RESULTED
BY NON-OBSERVANCE OF THESE INSTRUCTIONS MAKE THE
WARRANTY VOID.
¾ After transportation or storage of the product under
negative temperatures, before switching the device on it is
necessary to leave the device under room temperature in
its original package for AT LEAST 2 hours!
¾ To connect the guitar preamp to other devices use only the
cables intended for such connections.
¾ You must not use other cables types such as speaker, etc.
SWITCHING ON the guitar preamp:
¾ Switch the device on ONLY AFTER YOU HAVE DONE all
audio connections!
¾ Before connecting the preamp to mains make sure that the
case, the connecting cable and the of the power adapter
have no damages such as cuts, cracks, dents, etc. and are
operational.
¾ To switch the preamp on first insert the low-voltage
connector of the power adapter into corresponding jack on
the rear panel of the guitar preamp and only then plug the
adapter into the mains outlet.
SWITCHING OFF the guitar preamp:
¾ To switch the preamp off first disconnect the power
adapter from mains and then disconnect its low-voltage
connector from the jack on the rear panel of the guitar
preamp.
COMPLETE SET
The complete set includes:
1. The guitar preamp 1
2. Instruction manual 1
3. Packaging 1
4. Warranty card 1