Cisco 2600 series Installation Manual
Download Installation manual of Cisco 2600 Series Gateway, IP Camera for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Gateway , IP Camera , Network Hardware , Network Router , Security Camera , Server , Software
Type: Installation manual for Cisco 2600 Series
Pages: 22
CHAPTER
3-1
Cisco 2600 Series Routers Hardware Installation Guide
OL-2171-02
3
Installing the Router
This chapter guides you through the installation of the Cisco 2600 series routers and includes the
following sections:
• Required Tools and Equipment, page 3-1
• Setting Up the Chassis, page 3-2
• Connecting the DC Power Supply, page 3-12
• Power on the Router, page 3-17
• Connecting to a Network, page 3-17
• Connecting the Console Terminal and Modem, page 3-20
• What to Do After Installing Router Hardware, page 3-22
Warning
Onlytrainedandqualifiedpersonnelshouldbeallowedtoinstallorreplacethisequipment.To see
translations of the warnings that appear in this publication, refer to the
Regulatory Compliance
and Safety Information
document that accompanied this device.
Required Tools and Equipment
Installation might require some tools and equipment that are not provided as standard equipment with
the router. Following are the tools and parts required for a typical router installation:
• Number 2 Phillips screwdriver.
• Flat-blade screwdrivers: small, 3/16-in. (0.476 cm) and medium, 1/4-in. (0.625 cm).
• Electrostatic discharge (ESD)-preventive wrist strap.
• Screws to secure the rack-mount brackets to the router.
• Grounding lug with attaching screws.
• Cables for connecting a PC or modem to the router (included).
• Cables for connection to the WAN and LAN ports (dependent on configuration):
–
Ethernet 10BASE-T cable for connection to an Ethernet port (included).
–
Ethernet 100BASE-T cable for connection to a Fast Ethernet port (included).
–
Token Ring lobe cable for connection to the Token Ring port (included).