• Home
• Brands
• Cisco Manuals
• Cisco C7200-I - Input/Output Controller - Control Processor
• Cisco C7200-I - Input/Output Controller - Control Processor User Manual

Cisco C7200-I - Input/Output Controller - Control Processor User Manual

Download Operation & user’s manual of Cisco C7200-I - Input/Output Controller - Control Processor Storage for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

1

12.1(5)T and 12.2(14) S

Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E

Input/Output Controllers

This feature module describes the two new variants of the Cisco 7200 I/O card. The

Cisco 7200-I/O-GE+E provides one Gigabit Ethernet port and one Ethernet port. The

Cisco 7200-I/O-2FE/E provides two autosensing Fast Ethernet 10/100 Mb ports.

This document includes the following sections:

• Feature Overview

• Supported Platforms

• Supported Standards, MIBs, and RFCs

• Configuration Tasks

• Monitoring and Maintaining the Cisco 7200-I/O GE+E and Cisco 7200-2FE/E

• Configuration Examples

• Command Reference

Feature Overview

The Cisco 7200-I/O-GE+E is an Input/Output controller that provides one Gigabit Ethernet and one

Ethernet port. It is equipped with a GBIC receptacle for 1000 megabits per second (Mbps) operation

and an RJ-45 receptacle for 10 Mbps operation.

The Cisco 7200-I/O-2FE/E is an Input/Output controller that provides two autosensing Fast Ethernet

ports and is equipped with two RJ-45 receptacles for 10/100 Mbps operation.

I/O controllers support the following features:

• Dual EIA/TIA-232 channels for local console and auxiliary ports

• NVRAM for storing the system configuration and environmental monitoring logs

• Two PC Card slots that hold Flash disks or Flash memory cards for storing the default Cisco IOS

software image

• Flash memory for storing the boot helper image

• Two environmental sensors for monitoring the cooling air as it enters and leaves the chassis