Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor User Manual
Download Hardware installation manual of Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor Fan for Free or View it Online on All-Guides.com.
Brand: Cisco
Category: Fan
Type: Hardware installation manual for Cisco 15530-LCMB-0200 - ESCON Multiplexing Line Card Multiplexor
Pages: 36 (2.91 Mb)
CHAPTER
2-1
Cisco ONS 15530 Hardware Installation Guide
OL-7706-01
2
Installing the Cisco ONS 15530
This chapter describes the installation procedures for the Cisco ONS 15530 chassis and its components.
This chapter includes the following sections:
• Before Installing, page 2-1
• Chassis-Lifting Guidelines, page 2-2
• Rack-Mounting the Shelf, page 2-4
• Grounding the Shelf, page 2-14
• Installing and Removing Line Cards or Motherboards, page 2-17
• Installing and Removing Modules, page 2-24
• Replacing the Fan Assembly, page 2-27
• Power Guidelines, page 2-29
• Powering Up the Shelf, page 2-31
Note Before you install, operate, or service the system, read the Regulatory Compliance and Safety
Information for the Cisco ONS 15500 Series for important safety information you should know before
working with the system.
Note To ensure that your Cisco IOS software release supports your hardware, see the “New and Changed
Information” section on page vii. Also refer to the “Hardware Supported” section of the latest release
notes for the Cisco ONS 15530.
Before Installing
Before you install the Cisco ONS 15530, you must complete the following tasks:
• Unpack and inspect the shelf.
• Maintain a network record.
• Assemble required tools and equipment.
• Mount the shelf.